[POSITION] menu

[KEYSTONE] (PT-DW17KU only)

You can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted.

1)Press ▲▼ to select [KEYSTONE].

2)Press the <ENTER> button.

3)Press ▲▼ to select the item to adjust.

4)Press ◀▶ to adjust the level.

■■[KEYSTONE]

■■[SUB KEYSTONE]■■[LINEARITY]

Settings

Note

zzThe menu or logo may run off the screen when various adjustments are performed with [KEYSTONE].

zzVarious adjustments with [KEYSTONE] are possible to correct up to ±40° for the tilt in vertical direction. However, the picture quality will degrade and it will get harder to focus with more correction. Install the projector so the correction will be as small as possible. (±22° when using projection lens ET-D75LE5/ET-D75LE50, or ±28° when using the ET-D75LE6.)

zzImage size will also change when [KEYSTONE] is used to perform adjustments.

zzTrapezoidal distortion may occur depending on the lens shift position.

zzAspect ratio of the image size may shift depending on the correction or lens zoom value.

76 - ENGLISH