Maintenance
Maintenance/replacement
6) Attach the lamp case.
zzGently push in the lamp case along the grooves for the lamp case attachment guide on the projector, and then firmly tighten the lamp case fixing screws (two screws).
zzWhen you secure the lamp case with the projector installed upward in the vertical direction, the lamp case may drop off on its weight. Be sure to hold the lamp case handle when you tighten the lamp case fixing screws.
zzIf the lamp case is not installed properly, remove it and then gently install it again. Pushing it in forcibly or exerting excessive force may break the connector.
zzMake sure to attach the lamp case properly.
Grooves of the guide to attach the lamp case
Guides to attach the lamp case
Lamp case handles | Lamp case L | Lamp case R |
Lamp case fixing screws
7) Attach the lamp unit cover.
(i) Align the lamp unit cover to the marks of (a) and (b) ( and ) to attach as shown by the arrow. (ii) Close the lamp unit cover in the direction of the arrow and use a Phillips screw driver to firmly tighten
the lamp unit cover fixing screw (one screw). zzMake sure to attach the lamp unit cover properly.
D
E L
LL
Note
zzWhen you place the new lamp unit, the projector resets the total usage time of the lamp unit automatically. zzWhen the lamp case is removed or attached, it will be caught because of the
however, is not a problem.
150 - ENGLISH