[ADVANCED MENU]

Select [ADVANCED MENU] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( page 61) for the operation of the menu screen.

zzAfter selecting the item, press ▲▼◀▶ to set.

[DIGITAL CINEMA REALITY]

You can increase the vertical resolution and enhance the picture quality by performing the cinema processing when the PAL (or the SECAM) 576i signal, the NTSC 480i, 1080/50i, and 1080/60i signals are input.

1)Press ▲▼ to select [DIGITAL CINEMA

REALITY].

2)Press ◀▶ to switch [DIGITAL CINEMA

REALITY].

zzThe setting will change as follows each time you press the button.

[AUTO][OFF]

[25p FIXED] (when a 576i or 1080/50i signal is input)

[30p FIXED] (when a 480i or 1080/60i signal is input)

[ADVANCED MENU][BLANKING]

The blanking width is adjusted when there are noise at the edge of the screen or the image is slightly running out from the screen when an image from the VCR or other devices are projected.

1) Press ▲▼ to select [BLANKING].

2) Press the <ENTER> button. zzThe [BLANKING] adjustment screen is

displayed.

3) Press ▲▼ to select the adjustment item.

4) Press ◀▶ to adjust the blanking. zzChanges within the following range.

For PT-DZ21KU

Left to right: 0 to 959, Top to bottom: 0 to 599

For PT-DS20KU

Left to right: 0 to 699, Top to bottom: 0 to 524

For PT-DW17KU

Left to right: 0 to 682, Top to bottom: 0 to 383

When correcting blanking at the top of the screen [UPPER]

Press ◀ to move the blanking zone upward. Press ▶ to move the blanking zone downward.

When correcting blanking at the bottom of the screen [LOWER]

Press ▶ to move the blanking zone upward.

[AUTO]

[OFF]

[25p FIXED]

[30p FIXED]

Note

Performs automatic detection and cinema processing.

(Factory default)

Unforced cinema processing.

Forced cinema processing (2:2 pulldown) is performed when a 576i or 1080/50i signal is input.

Forced cinema processing (2:2 pulldown) is performed when a 480i or 1080/60i signal is input.

Press ◀ to move the blanking zone downward.

When correcting blanking at the left of the screen [LEFT]

Press ▶ to move the blanking zone to the right. Press ◀ to move the blanking zone to the left.

When correcting blanking at the right of the screen [RIGHT]

Settings

zzIn [DIGITAL CINEMA REALITY] mode, the picture quality will degrade when a signal other than the 2:2 pulldown is set as [25p FIXED] or [30p FIXED]. (Vertical resolution will degrade.)

Press ◀ to move the blanking zone to the right. Press ▶ to move the blanking zone to the left.

For [CUSTOM MASKING]*1

Set from a PC to perform blanking in any shape.

*1: To use the [CUSTOM MASKING] function, an optional upgrade kit (Model No.: ET-UK20) is required. To purchase the product, consult your dealer.

ENGLISH - 77