■■To adjust the date and time manually

4) Select [ADJUST CLOCK] in Step 3).

5) Press the <ENTER> button.

zzThe [ADJUST CLOCK] screen is displayed.

6)Press ▲▼ to select an item, and press ◀▶ to set the local date and time.

7)Press ▲▼ to select [APPLY], and

press the <ENTER> button.

zzThe setting of the time will be completed.

■■To adjust the date and time automatically

4) Select [ADJUST CLOCK] in Step 3).

5) Press the <ENTER> button.

zzThe [ADJUST CLOCK] screen is displayed.

6)Press ▲▼ to select [NTP SYNCHRONIZATION], and press ◀▶

to change the setting to [ON].

zzThe setting will change as follows each time you press the button.

[OFF][ON]

7) Press ▲▼ to select [APPLY], and press the <ENTER> button. zzThe setting of the time will be completed.

Note

zzTo set the date and time automatically, the projector must be connected to the network.

zzIf synchronization with the NTP server fails just after [NTP SYNCHRONIZATION] is turned [ON], or if [NTP SYNCHRONIZATION] is turned [ON] while the NTP server is not set, [NTP SYNCHRONIZATION] will return to [OFF].

zzAccess the projector via a web browser to set the NTP server. ( page 134)

[PROJECTOR SETUP] menu

[LENS CALIBRATION]

Automatically set the lens shift limit values and home position for the projector.

1) Press ▲▼ to select [LENS

CALIBRATION].

2) Press the <ENTER> button. zzA confirmation message is displayed.

3) Press ◀▶ to select [OK], and press the <ENTER> button.

zzTo cancel, select [CANCEL].

zzThe lens moves up, down, left and right to automatically set the lens shift limit values and home position.

zzThe lens stops to complete the calibration.

Note

zz[PROGRESS] is displayed on the menu during lens calibration. Cannot cancel mid-operation.

zzWhen lens calibration executes correctly, [COMPLETE] is displayed and [INCOMPLETE] is displayed when it does not execute correctly.

Settings

ENGLISH - 111