Settings

[DISPLAY OPTION] menu

■■To set [PC CORRECTION]

To use the [PC CORRECTION] function, an optional upgrade kit (Model No.: ET-UK20) is required. To purchase the product, consult your dealer.

4) Select [PC CORRECTION] in Step 3).

5) Press ◀▶ to switch.

 

zzThe setting will change as follows each time

you press the button.

 

[ON]

[OFF]

[ON]*1

Use a computer to correct the

brightness and color unevenness of

 

the entire screen.

[OFF]

A computer cannot be used to

correct.

 

*1: Advanced skills are necessary to use computer controls to correct. Consult your dealer.

Note

zz[UNIFORMITY] can be set for each [LAMP SELECT] setting.

zzThe setting value for [UNIFORMITY] will not return to the factory default value even if [INITIALIZE] is executed.

[SHUTTER SETTING]

Set image fade-in and fade-out at opening and closing of the shutter. Set automatic opening and closing of the shutter when power is turned on and off.

1) Press ▲▼ to select [SHUTTER

SETTING].

2) Press the <ENTER> button.

zzThe [SHUTTER SETTING] screen is displayed.

3) Press ▲▼ to select an item.

■■To set [FADE-IN] or [FADE-OUT]

4) Select [FADE-IN] or [FADE-OUT] in Step 3).

5) Press ◀▶ to switch.

zzThe setting can be set to [OFF], or to a value from [0.5 s] to [4.0 s].

Note

zzPress the <SHUTTER> button on the remote control or the control panel during fade-in or fadeout to cancel the fade operation.

■■Setting [STARTUP]

4) Select [STARTUP] in Step 3).

5) Press ◀▶ to switch.

zzThe setting will change as follows each time

you press the button.

 

 

 

 

[OPEN]

 

 

[CLOSE]

 

 

[OPEN]

Projection begins when the shutter

is open and the power is turned on.

 

[CLOSE]

Projection begins when the shutter

is closed and the power is turned on.

 

■■To set [SHUT-OFF]

4) Select [SHUT-OFF] in Step 3).

5) Press ◀▶ to switch.

 

 

zzThe setting will change as follows each time

you press the button.

 

 

 

 

 

 

 

 

[OPEN]

 

 

[CLOSE]

 

[KEEP CURRENT

 

 

 

STATE]

 

 

 

 

 

 

 

 

[OPEN]

 

Enters standby when the shutter is

 

open and the power is turned off.

 

 

[CLOSE]

 

Enters standby when the shutter is

 

closed and the power is turned off.

 

 

[KEEP

 

Maintains the current shutter status

CURRENT

 

and enters standby when the power

STATE]

 

is turned off.

 

 

[FREEZE]

The projected image is paused temporarily regardless of the playback of the external equipment.

1) Press ▲▼ to select [FREEZE].

2) Press the <ENTER> button. zzPress the <MENU> button to release.

[WAVEFORM MONITOR]

Use the input signals from a connected external device to display in a waveform. Check whether image output (luminance) signal level is within the recommended range for the projector and adjust.

1)Press ▲▼ to select [WAVEFORM

MONITOR].

96 - ENGLISH