About your projector
■■Side■■Top

Remote control signal transmitter

■■Bottom

Remote control wired terminal ( page 27)

Preparation

(19)<LOCK> button

Used to prevent unintended operation by careless pressing of the buttons and prevent draining the remote control batteries.

Attention

zzDo not drop the remote control.

zzAvoid contact with liquids or moisture.

zzDo not attempt to modify or disassemble the remote control.

Note

zzThe remote control can be used within a distance of about 30 m (98'5") if pointed directly at the remote control receiver. The remote control can control at angles of up to ±15° vertically and ±30° horizontally, but the effective control range may be reduced.

zzIf there are any obstacles between the remote control and the remote control signal receiver, the remote control may not operate properly.

zzThe signal will be reflected off the screen. However, the operating range may be limited due to light reflection loss because of the screen material.

zzIf the remote control signal receiver directly receives strong light, such as fluorescent light, the remote control may not operate properly. Use it in a place distant from the light source.

zzThe power indicator <ON (G)/STANDBY (R)> will flash if the projector receives a remote control signal.

ENGLISH - 23