[3D SETTINGS] menu (PT‑DZ21KU and PT‑DS20KU only)

zzItems set in [3D SYNC2]

[OFF]

Not used.

[1]

Stereo synch output

[2]

3D trigger output

[3]

Through 3D SYNC1

[4]

Stereo synch output

[5]

3D trigger output

[6]

Through 3D SYNC1

[7]

Stereo synch output

[8]

3D trigger output

[9]

Frame synch output

[10]

Frame synch output

[11]

3D IR TRANSMITTER (–) output

6)If you selected [1], [4], [7], or [10], press ▲▼ to select [STEREO SYNC OUTPUT DELAY] and press ◀▶ to set

the amount of delay output.

zzValues in the following range change by units of 10 us.

0 us to 25 000 us

zzTo synchronize multiple projectors to display 3D images, use a frame synch input and output. Select [9] or [10] for the first projector.

Select [6], [7], or [8] for the second and subsequent projectors.

zzStereo synch is a Duty 50% signal at High during Left and at Low during Right.

zzAn “H” is output to the 3D images display and an “L” is output to the 2D image display from the terminal for which 3D trigger output is selected.

Note

[3D SIMUL INPUT SETTING]

Set to input and use simultaneous 3D images signals.

1) Press ▲▼ to select [3D SIMUL INPUT

SETTING].

2) Press the <ENTER> button.

zzThe [3D SIMUL INPUT SETTING] screen is displayed.

3) Press ▲▼ to select [LEFT:RGB1

RIGHT:RGB2], [LEFT:HDMI RIGHT:DVI-D], or [LEFT:SDI1 RIGHT:SDI2].

4) Press ◀▶ to switch the setting. zzThe setting will change as follows each time

you press the button.

[OFF][AUTO]

[OFF] Cannot use 3D simultaneous.

[AUTO] Displays simultaneous 3D images.

Note

zzWhen set to [AUTO], 3D images are displayed when the same 3D compatible signals are entered to each input. However, the P IN P status during P IN P is maintained.

zzThis may not function properly for some external devices that are connected.

zzCertain signals may not function properly.

zz[11] of [3D SYNC SETTING] is the setting when the 3D IR Transmitter TY-3DTRW (Panasonic) is used with this projector. As for connecting method, consult your dealer.

Settings

ENGLISH - 83