[PICTURE] menu

Select [PICTURE] from the main menu, and select the item from the sub-menu.

Refer to “Navigating through the menu”

( page 61) for the operation of the menu screen.

zzAfter selecting the item, press ▲▼◀▶ to set.

[PICTURE MODE]

You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.

1) Press ▲▼ to select [PICTURE MODE].

2) Press ◀▶ .

zzThe [PICTURE MODE] individual adjustment screen is displayed.

3) Press ◀▶ to switch the [PICTURE

MODE].

zzThe setting will change as follows each time you press the button.

[STANDARD] [CINEMA] [NATURAL]

[USER]

 

[DICOM

 

SIM.]

 

 

[GRAPHIC] [DYNAMIC]

[STANDARD] The picture becomes suitable for moving images in general.

[CINEMA]

The picture becomes suitable for

movie sources.

 

[NATURAL] The picture is sRGB compliant.

The picture becomes similar to [DICOM SIM.] that of DICOM Part14 Grayscale

Standard.

[DYNAMIC]

The light output is maximized for use

in bright areas.

 

[GRAPHIC]

The picture becomes suitable for

input from to the personal computer.

 

[USER]

Set any desired picture mode.

[PICTURE] menu

Note

zzThe factory default picture mode is [GRAPHIC] for still image input signals and [STANDARD] for movie based input signals.

zzDICOM is an abbreviation for “Digital Imaging and Communication in Medicine” and is a standard for medical imaging devices. Although the DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images.

zzPress the <ENTER> button when each [PICTURE MODE] is selected to save as a specified value when a new signal is input. The data of all items except [SYSTEM SELECTOR] in the [PICTURE] menu is saved.

zzIn the factory default settings, [USER] is set to images that comply with the ITU-R BT.709 standard.

■■To change the [USER] name

4) Select [USER] in Step 3).

5) Press the <ENTER> button. zzThe [PICTURE MODE] detailed screen is

displayed.

6) Press ▲▼ to select [PICTURE MODE

NAME CHANGE].

7) Press the <ENTER> button. zzThe [PICTURE MODE NAME CHANGE]

screen is displayed.

8)Press ▲▼◀▶ to select the character, and press the <ENTER> button to enter the character.

9)Press ▲▼◀▶ to select [OK], and

press the <ENTER> button.

zzThe picture mode name is changed.

Settings

ENGLISH - 65