[NETWORK] menu

■■[Network config] page

Click [Detailed set up] → [Network config].

zzClick [Network config] to display the [CAUTION!] screen. zzClick [Next] to display the current settings.

zzClick [Change] to display the following setting change screen.

 

(1)

[PROJECTOR NAME]

 

 

Enter the name of the projector. Also enter the host

 

 

name if it is required when using a DHCP server, etc.

(1)

(2)

[DHCP ON]/[DHCP OFF]

(2)

 

To enable the DHCP client function, set to [DHCP

(3)

 

ON].

(3)

[IP ADDRESS]

 

(4)

 

Enter the IP address when not using a DHCP server.

(5)

(4)

[SUBNET MASK]

(6)

 

Enter the subnet mask when not using a DHCP

 

server.

(7)

 

(5)

[DEFAULT GATEWAY]

 

(8)

 

Enter the default gateway address when not using a

 

 

DHCP server.

 

(6)

[DNS1]

 

 

Enter the DNS 1 server address.

 

 

Permissible characters for the entry of DNS 1 server

 

 

address (primary):

 

 

Numbers (0 to 9), period (.)

 

 

(Example: 192.168.0.253)

 

(7)

[DNS2]

 

 

Enter the DNS 2 server address.

 

 

Permissible characters for the entry of DNS 2 server

 

 

address (secondary):

 

 

Numbers (0 to 9), period (.)

 

 

(Example: 192.168.0.254)

 

(8)

[Back]/[Next]

 

 

Click the [Back] button to return to the original screen.

 

 

[Next]The current settings are displayed by pressing

 

 

the button. Click the [Submit] button to update the

 

 

settings.

Note

zzWhen you use the “Forward” and “Back” functions of your browser, a warning message “Page has Expired” may appear. In that case, click [Network config] again since the following operation will not be guaranteed.

Settings

ENGLISH - 133