[SECURITY] menu

Select [SECURITY] from the main menu, and select the item from the sub-menu.

Refer to “Navigating through the menu”

( page 61) for the operation of the menu screen.

zzWhen the projector is used for the first time Initial password: Press ▲▶▼◀▲▶▼◀ in order, and press the <ENTER> button.

zzAfter selecting the item, press ▲▼◀▶ to set.

Attention

zzWhen you select the [SECURITY] from the main menu and press the <ENTER> button, entering a password is required. Enter the set password and then continue operations of the [SECURITY] menu.

zzWhen the password has been changed previously, enter the changed password, and press the <ENTER> button.

Note

zzThe entered password is displayed with * mark on the screen.

[SECURITY PASSWORD]

The [SECURITY PASSWORD] screen is displayed when the power is turned on. When the entered password is incorrect, the operation will be restricted

to the power standby <> button, the <SHUTTER> button, and the <LENS> (<FOCUS>, <ZOOM>, and <SHIFT>) buttons.

1)Press ▲▼ to select [SECURITY

PASSWORD].

2)Press ◀▶ to switch [SECURITY

PASSWORD].

zzThe setting will change as follows each time you press the button.

[OFF]

 

 

[ON]

 

 

[OFF]

Disables the security password

entry.

 

[ON]

Enables the security password entry.

[SECURITY] menu

Note

zzThe [SECURITY PASSWORD] setting is set to [OFF] at the time of purchase or when all the user data has been initialized.

zzChange the password periodically that is hard to guess.

zzThe security password will be enabled after setting [SECURITY PASSWORD] to [ON] and turning the <MAIN POWER> switch to <OFF>.

[SECURITY PASSWORD CHANGE]

Change the security password.

1) Press ▲▼ to select [SECURITY

PASSWORD CHANGE].

2) Press the <ENTER> button. zzThe [SECURITY PASSWORD CHANGE]

screen is displayed.

3) Press ▲▼◀▶ and the number (<0> to <9>) buttons to set the password. zzUp to eight button operations can be set.

4)Press the <ENTER> button.

5)Re-enter the password for the confirmation.

6)Press the <ENTER> button.

Note

zzThe entered password is displayed with * mark on the screen.

zzAn error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.

Settings

ENGLISH - 121