Panasonic PT-DS20KU, PT-DW17KU, PT-DZ21KU [SDI IN], [HDMI IN], ■■To set [SDI LINK], [DISPLAY OPTION] menu, ■■To set [SDI SIGNAL LEVEL]

[HDMI IN]

Switch the setting when the projector is connected to an external device via an HDMI cable and the image is not projected correctly.

1) Press ▲▼ to select [HDMI IN].

2) Press the <ENTER> button. zzThe [HDMI IN] screen is displayed.

3) Press ◀▶ to switch [HDMI SIGNAL

LEVEL].

zzThe setting will change as follows each time you press the button.

[0-1023][64-940]

Select when the DVI-D terminal output of an external device (such as a computer) is connected to the <HDMI IN> terminal via a conversion

[0-1023]cable or similar cable.

Select also when the HDMI terminal output of a computer or other device is connected to the <HDMI IN> terminal.

Select when the HDMI terminal of

[64-940]an external device (such as a blu- ray disc player) is connected to the

<HDMI IN> terminal.

Note

zzThe optimal setting is different depending on the output setting of the connected external equipment. Refer to the instruction manual of the external equipment regarding the output of the external equipment.

zzThe HDMI signal level is displayed per each 30 bits of input.

[DISPLAY OPTION] menu

[SDI IN] (PT‑DZ21KU and PT‑DS20KU

only)

Set to match the signal to input to the <SDI IN 1>/<SDI IN 2> terminal.

1) Press ▲▼ to select [SDI IN].

2) Press the <ENTER> button. zzThe [SDI IN] screen is displayed.

3) Press ▲▼ to select an item.

■■To set [SDI LINK]

4)	Select [SDI LINK] in Step 3).
5)	Press ◀▶ to switch [SDI LINK].
	zzThe setting will change as follows each time
	you press the button.
	[SINGLE LINK]		[DUAL LINK]
	[SINGLE	Set SDI1 input and SDI2 input to
	LINK]	single link.
[DUAL LINK]		Set SDI1 input and SDI2 input to
		dual link.

■■To set [SDI SIGNAL LEVEL]

Select the amplitude of the signal to input.

4)Select [SDI SIGNAL LEVEL] in Step 3).

5)Press ◀▶ to switch [SDI SIGNAL

LEVEL].

zzThe setting will change as follows each time you press the button.

[64-940][4-1019]

[64-940]	Normally use this setting.
[4-1019]	Select when gray is displayed as
	black.

Settings

ENGLISH - 93