P
Passed, self-test result, 7-8 pattern test, 8-8
payload rate EIA-530,A-4
Payload Rate Mismatch status message, 7-5 performance statistics, 7-13,7-19
DSX-1,7-15
G.703, 7-17
Inband Management, 7-20 physical environment requirements, D-1pin assignments
front panel, C-1 Telco 50-pin,C-3
PLD Failure, self-test result, 7-8Port
DSL, A-22
Status, A-2,A-7,A-9PORTS LEDs
switching between DSL and DTE, 7-25 power requirements, D-1
Primary Clock
Failed status message, 7-6Source
DSX-1,A-8
G.703, A-11Primary System Clock
Failed status message, 7-6 Reference, A-18
R
related documents, vi
remote send line loopback, 8-7 repeater loopback (RLB), 8-5reset
ATI, 3-10 AutoRate, 3-11 device, 3-10 slot, 3-10
restore access to ATI, 3-10
S
Save Configuration screen, 3-9
saving configuration option changes, 3-7 to TFTP server, 9-4
screen, function keys, 2-7 screens for user interface, 2-1 SDSL Mode, A-13Secondary
holdover mode, A-16 System Clock failure, A-16 System Clock Reference, A-18
security, 6-1self-test results, 7-7Send
and Monitor 511, 8-9 Remote Line Loopback, 8-7
Set Cross Connect Mode, A-20 size of card, D-1
SNMP
enable/disable traps, A-35 Enterprise Specific Traps, A-36 general management capabilities, 1-4 limiting management access, 6-5 Link Trap Interfaces, A-36
Link Traps, A-36
NMS IP Address, A-33
Number of Trap Managers, A-35 system entries, 3-2
trap
manager IP Address, A-35 NMS destination, A-35
Traps, B-1 Options, A-34
Source, A-23start-up, ATI, 2-1Status menu
Performance Statistics Inband Management, 7-20
status, test messages, 7-9System
Clock options, A-15 device name fields, 3-2 LEDs, 7-24
System Options DSL Mode, A-13
Telco-Initiated Loopback, A-14 Test Duration, A-14
Test Timeout, A-13
T
Telco-initiated
line loopback, 8-11 loopback, disabling, A-14 payload loopback, 8-11 remote line loopback, 8-12
Telnet session access, 6-1 access level, A-29
Disconnect Time (Minutes), A-29 enable/disable, A-29
inactivity timeout, A-29 login required, A-29 options, A-28
Session Access Level, A-29
