Paradyne U8777, 8779 manual Lamp Test, Main Menu → Test→ Device Tests

8. Testing

Device Tests

The Device Tests branch is only used to access the card-level test, the Lamp Test. To access the Device Tests screen, follow this menu selection sequence:

Main Menu → Test→ Device Tests

main/test/card

		Model: 87xx
	DEVICE TESTS
Test	Command	Status

--------------------------------------------------------------------------------

Lamp Test: Start Inactive

--------------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit

Lamp Test

The Lamp Test determines whether all LEDs are lighting and functioning properly.

Procedure

To test the LEDs:

1.Position the cursor at the Start command next to Lamp Test on the Device Tests screen.

2.Press Enter.

The Start command is changed to Stop. During the Lamp Test, all LEDs blink simultaneously every second.

3.To stop the Lamp Test, position the cursor at the Stop command. The LEDs are restored to their normal condition.

4.Press Enter.

8700-A2-GB20-40 May 2002 8-9