Paradyne U8777, 8779 About This Guide, Document Purpose and Intended Audience, Document Summary

About This Guide

Document Purpose and Intended Audience

This guide contains information needed to set up, configure, and operate Hotwire 8777 and 8779 Time Division Multiplexer Symmetric Digital Subscriber Line (TDM SDSL) Termination Units, and is intended for installers and operators.

New Features for this Release

This version of the Hotwire TDM SDSL Termination Units, Models 8777 and 8779, User’s Guide adds the inband management feature for the Model 8779 Termination Unit.

Document Summary

Section	Description
Chapter 1, About Hotwire 8777	Describes the Hotwire Termination Unit’s features
and 8779 TDM SDSL Units	and capabilities.
Chapter 2, Using the	Provides instructions for accessing the user interface
Asynchronous Terminal Interface	and navigating the screens.
Chapter 3, Initial Startup and	Provides procedures for setting up the user interface
Configuration	and configuring the unit.
Chapter 4, Cross-Connecting	Provides instructions for cross-connecting the time
Ports	slots of the DSL and DTE ports.
Chapter 5, IP Addressing	Provides IP addressing requirements and examples.
Chapter 6, Security	Presents procedures for creating a login, setting the
	effective access levels, and controlling SNMP
	access.
Chapter 7, Monitoring and	Describes using the LEDs, status messages, and
Troubleshooting	network statistics to monitor the unit and diagnose
	problems.
Chapter 8, Testing	Provides instructions for running network, DSX-1,
	and G.703 tests.

8700-A2-GB20-40 May 2002 v