Paradyne 8779, U8777 manual WarmStart, AuthenticationFailure, LinkUp and linkDown

B. Standards Compliance for SNMP Traps

For a unit defined as an NTU running IP Conservative software, all traps have at a minimum a variable binding of the Super Overloaded ifIndex (SOI). The formula for the SOI is:

((LTU Slot Number) * 1,000,000)

+((LTU DSL Port Number) * 1,000)

+the NTU’s ifIndex.

warmStart

	SNMP Trap	Description		Possible Cause
	warmStart	he unit has reinitialized		TReset command.
		itself.		Power disruption.
		he trap is sent after the unit
		resets and stabilizes.
		No variable bindings.
authenticationFailure
	SNMP Trap	Description		Possible Cause
	authenticationFailure	Failed attempts to access the		Three unsuccessful attempts
		unit.		were made to enter a correct
		VariableT	bindings:	login/password combination.
		devAuthentication
		FailureIPAddress
		(Health & Status MIB)
		Returns zero if the IP
		address is unknown or the
		failure came from the
		terminal port.

linkUp and linkDown

he link SNMP traps are:

linkUp – The unit recognizes that one of the communication interface is

Toperational.

linkDown – The unit recognizes that one of the communication interface is not operational.

The network and synchronous port interfaces (physical sublayer) are represented by an entry in the MIB-II interfaces table and supported by the DS1 MIB.

B-2 May 2002 8700-A2-GB20-40