Paradyne 8779, U8777 manual Restoring Access to the User Interface, Resetting the Device

3. Initial Startup and Configuration

Restoring Access to the User Interface

Improper configuration of the unit could render the user interface inaccessible. If this occurs, access can be restored using the management card of the DSLAM.

Procedure

To reset the DSL Card using the DSLAM’s management card:

1.Follow this menu selection sequence: Configuration → DSL Cards → Reset Slot

2.Enter DSLnn, where nn is the slot number for the DSL card you wish to reset.

3.Enter Reset.

4.Enter Y if you want to clear NVRAM also, otherwise enter N.

5.Enter Y at the prompt to confirm.

NOTE:

When you enter Y, all data connectivity is interrupted.

Resetting the Device

If the user interface is functional and you would like to reset the card without removing the card from the DSLAM, follow this procedure.

Procedure

To reset the card using the Control branch:

1.Follow this menu selection sequence: Main Menu → Control→ Reset Device

2.The message Are you sure? appears.

3.Enter Yes.

3-10 May 2002 8700-A2-GB20-40