Paradyne U8777, 8779 Performance Statistics, Device Messages 2 What Message Indicates What To Do

7. Monitoring and Troubleshooting

Table 7-4. Device Messages (2 of 2)

Device Message	What Message Indicates	What To Do
Limit of six Login IDs	An attempt to enter a new	1.	Delete another
reached	login ID was made, and the		login/password combination.
	limit of six login/password	2.	Re-enter the new login ID.
	combinations has been
	reached.
No Security Records to	Delete was selected from the		No action is needed.
Delete	Administer Login screen, and		Enter a security record.
	no security records had been
	defined.
Password Matching	Password entered in the	T	Try again.
Error – Re-enter	Re-enter Password field of		Contact your system
Password	the Administer Logins screen
			administrator to verify your
	does not match what was
			password.
	entered in the Password
	field.
Please Wait	Command takes longer than	Wait until message clears.
	5 seconds.
Test Active	A test is running and no		Contact service provider if
	higher priority health and		test initiated by the network.
	status messages exist.		Wait until the other test ends
			and message clears.
			Cancel all tests from the Test
		T	screen.
			Stop the test from the same
			screen the test was started
			from.

Performance Statistics

Performance statistics can assist you in determining the duration of specific conditions and provide a historical context for problem detection and analysis. Statistics are maintained for up to 96 15-minute intervals (24 hours).

Select a port to view the performance statistics. Port 1 is the default.

Use the applicable virtual function keys to page through the intervals and clear statistics.

Select PgUp or PgDn to view more statistics.

TSelect ClrNear or ClrFar to clear the near- and far-end statistics to zero. For DSX-1 and G.703 statistics, select ClrStats to clear all statistics to zero.

8700-A2-GB20-40 May 2002 7-11