Paradyne 8779, U8777 manual Switching Between Screen Work Areas, Example

2. Using the Asynchronous Terminal Interface

Switching Between Screen Work Areas

Select Ctrl-a to switch between the two screen work areas to perform all screen functions.

Procedure

To access the function key and message area below the dotted line:

1.Press Ctrl-a to switch from the screen area to the function key and message area below the dotted line.

2.Select either the function’s designated (underlined) character or press the Tab key until you reach the desired function key.

Example:

To save the current options, type s or S (Save).

3.Press Enter. The function is performed.

4.To return to the screen area above the dotted line, press Ctrl-a again.

main/config/network

Slot: 4Model: 87xx

Port: 2

NETWORK INTERFACE OPTIONS

Margin Threshold:	–3db
Excessive Error Rate Threshold:	1E–5
AutoRate:	Disable
DSL Line Rate:	1552

Circuit Identifier:Clear

--------------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Save

2-8 May 2002 8700-A2-GB20-40