Paradyne 8779, U8777 manual Transferring Firmware and Configurations Using Tftp

9. Transferring Firmware and Configurations Using TFTP

Procedure

To download firmware:

1.Position the cursor in the Image File Name field. Type the name of the file to be downloaded.

The file name must be a regular path name expression of directory names separated by a forward slash (/) ending with the file name. The total path name length can be up to 128 characters.

2.Position the cursor in the TFTP Server IP Address field. Enter the TFTP server IP address or M1 for the MCP FFS.

The first three digits of the IP address cannot be 000 or greater than 223.

3.For an LTU, go to Step 4. For an NTU, position the cursor in the Destination field. Use the spacebar to select a network destination for the TFTP server.

4.Position the cursor in the Immediately Apply Download field. If you would like the download to be effective immediately, select Yes.

5.Position the cursor at the Start Transfer field. Use the spacebar to select Yes. Press Enter.

When the data transfer is complete:

—If you selected Yes in Step 4, the card is reset.

—If you selected No, the Transfer Status field changes to Completed successfully.

If you specified No (the default) in the Immediately Apply Download field in Step 4, you must now apply the download.

main/control/apply_download

Model: 87xx

APPLY DOWNLOAD

Switch To Code Revision A01.00.02: No

WARNING:

An answer of “yes” will cause the system

to reset as if it had been powered off and on!

-------------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous		menu	MainMenu Exit
Select: Yes, No	LOS at	Net,	Pt 1

9-2 May 2002 8700-A2-GB20-40