Paradyne U8777, 8779 manual Self-Test Results Messages, Dte

7. Monitoring and Troubleshooting

Self-Test Results Messages

The results of the last power-on or reset self-test appear in the middle column of the System and Test Status screen.

Table 7-2. Self-Test Results Messages (1 of 2)

Message	What Message Indicates	What To Do
CPU Fail	The Central Processing Unit	1. Reset the unit and try again.
	failed internal testing.	2. Call your service
CPU CPLD Fail	The Complex Programmable	representative for
	Logic Device serving the	assistance.
	Central Processing Unit
	failed.
Data Path Fail, Pt n	The port shown failed to loop
	data on the full data path test.
DeviceFailed	One or more of the unit’s
	integrated circuits has failed
	device-level testing.
DSL	The DSL framer for Ports
Framer x Fail	1–4 (Framer A) or
	5– 8 (Framer B) failed.
DSL xcvr Fail, Pt n	The DSL transceiver failed
	on Port n.
DSX-1 Failed, Pt n	The unit failed to internally
	loop data on the DSX-1
	Port n.
DTE	The DTE framer for Ports
Framer x Fail	1– 4 (Framer A) or
	5– 8 (Framer B) failed.
DTE LIU x Fail	The DTE Line Interface Unit
	for Ports 1–2 (LIU A),
	3– 4 (LIU B), 5– 6 (LIU C), or
	7– 8 (LIU D) failed.
EEPROM Fail	The unit failed Electrically
	Erasable Programmable
	Read-Only Memory
	verification.
Failure xxxxxxxx	An internal failure occurred.	Record the failure code
	(xxxxxxxx represents an	and contact your service
	8-digit hexadecimal failure	representative.
	code for use by service
	personnel.)

8700-A2-GB20-40 May 2002 7-7