Paradyne U8777, 8779 manual Time Slot Number, Assign Time Slots DSL

A. Configuration Options

The following screen is displayed for a DSL port on a DSX-1 unit:

main/config/cross_connect/timeslot

Slot: 18

Model: 87xx

ASSIGN TIME SLOTS

DSL

Port: 1

DSOs to Allocate:

Start TS:

Assign To: D

TS01

TS02

TS03

TS04

TS05

TS06

TS07

X

d

X

d X

d X

d X

d X

d

X

d

TS08

TS09

TS10

TS11

TS12

TS13

TS14

X

d

X

d X

d X

d X

d X

d

X

d

TS15

TS16

TS17

TS18

TS19

TS20

TS21

X

d

X

d X

d X

d X

d X

d

X

d

TS22

TS23

TS24

X

d

X

d X

d

Key:

D =

DSL,

X = DSX-1

d =

data,

v = voice

--------------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Save	Clear_All

Select Clear_All to clear all time slot assignments for the port.

For an example showing how to configure the cross-connection system, see Chapter 4, Cross-Connecting Ports.

TS01
D 1 01	d

Port Type

(D = DSL		d (Data) or v (Voice)
G = G.703
X = DSX-1
I = IBMC)	Port Number	Time Slot Number
		(1–31)
	(1–8)

Refer to Table A-11, Assign Time Slots Options, for additional information about these entries.

NOTES:

—If a G.703 port is configured for Signaling_CAS, time slot 16 is used for signaling and is not available for cross-connection.

—Make sure that the number of DSL time slots defined are supported by the DSL line rate. The maximum number of useful DSL time slots is the DSL line rate divided by 64, rounded down to a whole number. See Table A-2, Payload Rates and DSL Line Rates for Model 8777, and Table A-3, Payload Rates and DSL Line Rates for G.703, for more information on available time slots at different DSL line rates.

8700-A2-GB20-40 May 2002 A-25