Paradyne 8779 Network Interface Options Menu, Table A-1. Network Interface Options 1, Port Status

A. Configuration Options

NOTE:

All changes to configuration options must be saved. Refer to Saving

Configuration Options in Chapter 3, Initial Startup and Configuration.

Network Interface Options Menu

For Network Interface Options, refer to Table A-1, Network Interface Options. To access the Network Interface Options screen, follow this menu selection sequence:

Main Menu → Configuration → Current Configuration → Network

main/config/network
Slot: 18				Model: 87xx
Port 2
	NETWORK INTERFACE OPTIONS
Port Status		Enable
Margin Threshold:		0db
Excessive Error Rate Threshold:		1E–6
AutoRate:		Disable
DSL Line Rate:		1552	Kbps
EIA-530 Payload Rate		1536	Kbps
Transmit Attenuation		0dB
Peer IP Address:		111.255.255.000 Clear
DS0 Cross Connect Line Framing:		ESF
Circuit Identifier:				Clear

--------------------------------------------------------------------------------

Ctrl-a to access these functions, ESC for previous menu	MainMenu Exit
Save

Table A-1. Network Interface Options (1 of 4)

Port Status

Possible Settings: Enable, Disable

Default Setting: Enable

Determines whether the port can be configured and used.

Enable – The port can be configured and used.

Disable – The port cannot be configured or used.

Margin Threshold

Possible Settings: –5db, – 4db, – 3db, –2db, –1db, 0db, 1db, 2db, 3db, 4db, 5db, 6db, 7db, 8db, 9db, 10db

Default Setting: 0db

Determines the level, expressed in decibels, at which a signal-to-noise margin condition is recognized.

–5db to 10db – Sets the margin threshold to this value.

A-2 May 2002 8700-A2-GB20-40