Polycom® RMX 1800 Administrator’s Guide
5-2 Polycom, Inc.
Figure 5-1 Video Layouts in Cascaded Conferences
Guidelines
To ensure that conferences can be cascaded and video can be viewed in all conferences the
following guidelines are recommended:
The same version installed on all MCUs participating the cascading topology
The same license installed on all MCUs participating the cascading topology
Same Conference Parameters are defined in the Profile of the conferences participating
in the cascading topology
Conference line rates should be identical
Content rate should be identical
Same encryption settings
DTMF codes should be defined with the same numeric codes in the IVR services
assigned to the cascading conferences
DTMF forwarding is suppressed
The video layout of the link is set to 1x1 by the appropriate system flag.
When the Mute Participants Except Lecturer option is enabled in the Conference
Profile, all participants (including the link participants) except the lecturer are muted.
Only the lecturer is not muted.
Gathering is not supported in Cascading Conferences.
Flags Controlling Cascade Layouts
Setting the FORCE_1X1_LAYOUT_ON_CASCADED_LINK
_CONNECTION System Flag to YES (default) automatically forces the cascading link to
Full Screen (1x1) in CP conferences, hence displaying the speaker of one conference to a
full window in the video layout of the other conference.
Set this flag to NO when cascading between an Collaboration Server and an MGC that
is functioning as a Gateway, if the participant layouts on the MGC are not to be forced
to 1X1.
Setting the AVOID_VIDEO_LOOP_BACK_IN_CASCADE System Flag to YES
(default) prevents the speaker’s image from being sent back through the participant
link from the cascaded conference. This can occur in cascaded conferences with
conference layouts other than 1x1. It results in the speaker’s own video image being
displayed in the speaker’s video layout.
During
Cascading
Video layout of Conf. B in
window of Conf. A
Video layout of Conf. A in
window of Conf. B