Polycom RMX 1800 Manually Adding and Deleting System Flags

Polycom® RMX 1800 Administrator’s Guide
20-10 Polycom, Inc.
7Click OK to close the System Flags dialog box
Manually Adding and Deleting System Flags
To add a flag:
1In the System Flags dialog box, click the New Flag ( ) button.
The New Flag dialog box is displayed.
2In the New Flag field enter the flag name.
3In the Value field enter the flag value.
The following flags can be manually added to the MCMS_PARAMETERS tab:
For flag changes (including deletion) to take effect, reset the MCU. For more information see
"Resetting the Collaboration Server (RMX)” on page 19-54.
Table 20-2 Manually Added System Flags – MCMS_PARAMETERS
Flag Description
802_1X_CERTIFICATE_MO
DE
Not Supported in RMX 1800.
802_1X_SKIP_CERTIFICAT
E_VALIDATION
Not Supported in RMX 1800.
802_1X_CRL_MODE Not Supported in RMX 1800.
802_FIPS_MODE Not Supported in RMX 1800.
ACCEPT_VOIP_DTMF_TYP
E
Defines the type of DTMF tones (inband) or digits (outband)
that the Collaboration Server will accept in VOIP calls.
Range:
•0 - Auto (default):
Inband or outband DTMF tones/digits are accepted
depending on the endpoint's current setting. If the
endpoint switches from inband to outband or visa versa
the value of the SET_DTMF_SOURCE_DIFF_IN_SEC
flag determines the time interval after which both inband
and outband tones/digits will be accepted.
•1 - Outband (H.245) only
•2 - Inband only