Polycom RMX 1800 19-24 , 10 Define the following parameters: , 11 Click the Add button to add a new Manager terminal.

Polycom® RMX 1800 Administrator’s Guide
19-24 Polycom, Inc.
10 Define the following parameters:
11 Click the Add button to add a new Manager terminal.
Table 19-13 SNMPv3 - Traps
Field Description
SNMP Trap Version Specifies the version, either Version 1 2 or 3 of the traps being sent to
the IP Host. Polycom software supports the standard SNMP version 1
and 2 traps, which are taken from RFC 1215, convention for defining
traps for use with SNMP.
Note: The SNMP Trap Version parameters must be defined
identically in the external SNMP application.
Trap Destination This box lists the currently defined IP addresses of the Manager
terminals to which the message (trap) is sent.
IP Enter the IP address of the SNMP
trap recipient.
All
Versions
Community
Name
Enter the Community Name of the
manager terminal used to monitor
the MCU activity
Version 1
and
Version 2
User Name Enter the name of the user who is to
have access to the trap.
Version 3
Authentication
Protocol
Enter the authentication protocol:
MD5 or SHA.
Privacy
Protocol
Enter the privacy protocol: DES or
AES.
Engine ID Enter an Engine ID to be used for
both the Agent and the Trap.
Default: Empty