Chapter 20-System Configuration Flags
Polycom, Inc. 20-15
LAN_REDUNDANCY Enables Local Area Network port redundancy.
Default: NO
Range: YES / NO
Note: If the flag value is set to YES and either of the LAN
connections (LAN1 or LAN2) experiences a problem, an
active alarm is raised stating that there is no LAN connection,
specifying both the card and port number.
MAX_TRACE_LEVEL This flag indicates the debugging level for system support.
Possible values:
TRACE = t, DEBUG = d, INFO_NORMAL = n, INFO_HIGH =
i, WARN = w, ERROR = e, FATAL = f, OFF = o.
Default: n
MAXIMUM_RECORDING_LI
NKS
The maximum number of Recording Links available for
selection in the Recording Links list and the Conference
Profile - Recording dialog box.
Range: 1 - 100
Default: 20
MINIMUM_FRAME_RATE_T
HRESHOLD_FOR_SD
Low quality, low frame rate video is prevented from being sent
to endpoints by ensuring that an SD channel is not opened at
frame rates below the specified value.
Range: 0 -30
Default: 15
MIX_LINK_ENVIRONMENT In H.239-enabled MIH Cascading, when MGC is on level 1,
setting this flag to YES will adjust the line rate of HD Video
Switching conferences run on the Polycom RMX 1800 from
1920Kbps to 17897, 100bits/sec to match the actual rate of
the HD Video Switching conference running on the MGC.
Note: If the flag MIX_LINK_ENVIRONMENT is set to YES,
the IP_ENVIRONMENT_LINK flag must be set to NO.
NUM_OF_INITIATE_HELLO
_MESSAGE_IN_CALL_EST
ABLISHMENT
Indicates how many times the Hello (keep alive) message is
sent from the Collaboration Server to the endpoint in an
environment that includes a Session Border Controller (SBC)
with a 3-second interval between messages.
Range: 1 to 10.
Default:3
NUMBER_OF_REDIAL Enter the number re dialing attempts required. Dialing may
continue until the conference is terminated.
Default: 3
Table 20-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description