Polycom® RMX™ 1800 Administrator’s Guide
16-6 Polycom, Inc.
6Click the DNS tab.
7Modify the following fields:
Table 16-3 Default Management Network Service – DNS
Field Description
MCU Host Name Enter the name of the MCU on the network.
Default name is PolycomMCU
DNS Select:
Off – if DNS servers are not used in the network.
Specify – to enter the IP addresses of the DNS servers.
Note: The IP address fields are enabled only if Specify is selected.
Register Host Names
Automatically to DNS
Servers
Select this option to automatically register the MCU Signaling Host
with the DNS server.
Local Domain Name Enter the name of the domain where the MCU is installed.
DNS Servers Addresses:
Primary Server
The static IP addresses of the DNS servers.
A maximum of three servers can be defined.
Secondary Server
Tertiary Server