Polycom RMX 1800 Manually Adding Flags to the CS_MODULE_PARAMETERS Tab, Deleting a Flag

Polycom® RMX 1800 Administrator’s Guide
20-20 Polycom, Inc.
4Click OK to close the New Flag dialog box.
The new flag is added to the flags list.
5Click OK to close the System Flags dialog box.
Manually Adding Flags to the CS_MODULE_PARAMETERS Tab
Using the procedure to manually add flags to the System Configuration, the following flags
can be manually added to the CS_MODULE_PARAMETERS tab:
Deleting a Flag
To delete a flag:
1In the System Flags dialog box, select the flag to delete and click the Delete Flag button.
2In the confirmation message box, click Yes to confirm.
3Click OK to close the System Flags dialog box.
WRONG_NUMBER_DIAL_
RETRIES
The number of re-dial attempts for a wrong destination
number or a wrong destination number time-out.
Range: 0 - 5
Default: 3
A flag value of 0 means that no redials are attempted.
Table 20-2 Manually Added System Flags – MCMS_PARAMETERS (Continued)
Flag Description
For flag changes (including deletion) to take effect, reset the MCU. For more information see
"Resetting the Collaboration Server (RMX)” on page 19-54.
Table 20-3 Manually Added Flags - CS_MODULE_PARAMETERS Tab
Flag Description
H323_TIMERS_SE
T_INDEX
Enables or disables H.323 index timer according to standard or proprietary
H.323 protocol.
Possible values:
0 (Default) - Sets the H.323 index timer to Polycom proprietary.
1 - Sets the H.323 index timer based on the H.323 Standard
recommendation.
Note: For homologation and certification testing, this flag must be set to 1.
QOS_IP_SIGNALIN
G
Used to select the priority of IP packets when DiffServ is the is the selected
method for packet priority encoding.
Range: 0x##
Default: 0x28
SIP_TIMERS_SET_
INDEX
SIP Timer type timeout settings according to standard or proprietary
protocol.
Possible values are:
0 - Default
1 - SIP Standard recommendation.
Note: For homologation and certification testing, this flag must be set to 1.