Polycom® RMX™ 1800 Administrator’s Guide
16-32 Polycom, Inc.
5Click Close to exit the System Flags window.
6When prompted to reset the MCU, click Yes.
Defining New IP Network Service
Use this procedure to define Network Services in addition to the Network Service already
defined during first entry installation and configuration.
To add new/additional Network Services:
1In the Device Management pane, click IP Network Services ().
2In the Network Services list toolbar, click the Add Network Service button.
The New IP Service - Networking IP dialog box opens.
3 Define the following fields:
4Optional. Some system flags can be defined per Network Service, depending on the
network environment.
To modify these flags, click the Service Configuration button.
Table 16-18 IP Network Service - IP Parameters
Field Description
Network Service
Name
Enter the IP Network Service name.
Note: This field is displayed in all IP Signaling dialog boxes and
can contain character sets that use Unicode encoding.
IP Network Type Select the IP Network environment. You can select:
•H.323: For an H.323-only Network Service.
•SIP: For a SIP-only Network Service.
•H.323 & SIP: For an integrated IP Service. Both H.323 and
SIP participants can connect to the Collaboration Server
using this service.
Note: This field is displayed in all Default IP Service tabs.
Signaling Host IP
Address
Enter the address to be used by IP endpoints when dialing into
the Collaboration Server using this Network Service.
Dial out calls of participants to whom this network service will be
assigned are initiated from this address.
This address is used to register the Collaboration Server with a
Gatekeeper or a SIP Proxy server residing on this network.
Note: The Signaling network shares the same IP address with
the Media 2 IP address and is not editable.
Media 1 IP Address Reserved for existing IP network Service.
Note: DO NOT change this IP address here.
Media 2 IP Address Enter the IP address for media network of the new IP network
service.
Subnet Mask Enter the subnet mask of the Collaboration Server in that
network service.
Default value: 255.255.255.0.