Chapter 21-Collaboration Server Hardware Monitoring
Polycom, Inc. 21-7
LAN 1 and LAN 2, Properties:
The Collaboration Server unit’s chassis contains two external LAN connectors which
register the following information listed below. The information will be refreshed every
8 seconds and also contains a peak detector to log the maximal values, since the last
peak values reset.
2Click Close to return to the Hardware Monitor pane.
Resetting the RMX 1800 DSP cards
If the DSP cards don’t function properly, you can reset them during a meeting.
When you reset a DSP card during a meeting, the system switches the impacted meeting
media to other DSP cards, if available. If no other DSP cards available, the impacted meeting
media is lost and there may be few seconds’ pause in the meeting video.
To reset a DSP card:
1In the RMX Management pane, click the Hardware Monitor button.
The Hardware Monitor pane appears.
2Right-click a desired DSP card and select Rescue.
Only Polycom Support can test DSP cards. For more information, contact your Polycom Support.