Polycom RMX 1800 - Administrator’s Guide
F-4 Polycom, Inc.
2Start the Collaboration Server Web Client application on the workstation, by entering the
factory setting Management IP address in the browser’s address line and pressing Enter.
3In the Collaboration Server Web Client Login screen, enter the default Username
(POLYCOM) and Password (POLYCOM) and click the Login button.
The Fast Configuration Wizard starts.
If no USB memory stick is detected and either: this is the First Time Power-up or the
Default IP Service has been deleted and the Collaboration Server has been reset, the
following dialog box is displayed:
For more information about First-time Power-up and the Fast Configuration Wizard see
the Polycom RMX 1800 Getting Started Guide, "Procedure 1: First-time Power-up” on
page2-8.
4Enter the following parameters using the information supplied by your network
administrator:
—Control Unit IP Address
—Shelf Management IP Address
—Control Unit Subnet Mask
—Default Router IP Address
5Click the Save & Close button.
The system prompts you to sign in with the new Control Unit IP Address.
6Disconnect the LAN cable between the workstation and the LAN Port on the
Collaboration Server’s back panel.
7Connect LAN Port on the Collaboration Server’s back panel to the local network using a
LAN cable.