Appendix C-CDR Fields - Unformatted File
Polycom, Inc. C-15
Table C-8 Event Fields for Event 2 - CONFERENCE END
Field Description
Conference End
Cause
Indicates the reason for the termination of the conference, as follows:
1 - The conference is an ongoing conference or the conference was
terminated by an MCU reset.
2 - The conference was terminated by a user.
3 - The conference ended at the scheduled end time.
4 - The conference ended automatically because no participants joined the
conference for a predefined time period, or all the participants disconnected
from the conference and the conference was empty for a predefined time
period.
5 - The conference never started.
6 - The conference could not start due to a problem.
8 - An unknown error occurred.
9 - The conference was terminated by a participant using DTMF codes.
Table C-11 Event Fields for Event 7 - PARTICIPANT DISCONNECTED
Field Description
Participant Name The name of the participant.
Participant ID The identification number assigned to the participant by the MCU.
Call Disconnection
Cause
The disconnection cause. For more information about possible values, see
TableC-39, “Disconnection Cause Values,” on page C-33.
Q931 Disconnect
Cause
If the disconnection cause is “No Network Connection” or “Participant Hang
Up”, then this field indicates the Q931 disconnect cause.
Table C-12 Event Fields for Event 2007 - PARTICIPANT DISCONNECTED CONTINUE1
Field Description
Rx Synchronization
Loss
The number of times that the general synchronization of the MCU was lost.
Tx Synchronization
Loss
The number of times that the general synchronization of the participant was
lost.
Rx Video
Synchronization
Loss
The number of times that the synchronization of the MCU video unit was
lost.
Tx Video
Synchronization
Loss
The number of times that the synchronization of the participant video was
lost.
Mux Board ID Not supported.
Always contains the value 0.