Polycom RMX 1800 Connecting to the Management Network

Appendix F-Configuring Direct Connections to the Collaboration Server
Polycom, Inc. F-3
6Enter the IP address, Subnet mask and Default gateway for the workstation.
The workstation’s IP address should be in the same network neighborhood as the
Collaboration Server’s Control Unit IP address.
Example: IP address – near 192.168.1.nn
The Subnet mask and Default gateway addresses should be the same as those for the
Collaboration Server’s Management Network.
The addresses needed for connection to either the Collaboration Server’s Default
Management Network or Alternate Management Network are listed in Table F-1.
For more information about connecting to the Alternate Management Network, see
"Configuring Direct Connections to the Collaboration Server” on pageF-1.
7Click the OK button.
Connecting to the Management Network
To connect directly to the Collaboration Server:
1Connect the power cable and power the Collaboration Server On.
None of the reserved IP addresses listed in Tab le F-1 should be used for the IP Address.
Table F-1 Reserved IP Addresses
Network Entity
IP Address
Management
Network
(Factory Default)
Alternate Network
Control Unit IP Address 192.168.1.254 169.254.192.10
Control Unit Subnet Mask 255.255.255.0 255.255.240.0
Default Router IP Address 192.168.1.1 169.254.192.1