Polycom® RMX 1800 Administrator’s Guide
7-4 Polycom, Inc.
4Click OK.The new Entry Queue is added to the Entry Queues list.
Profile Select the Profile to be used by the Entry Queue. The default Profile
is selected by default. This Profile determines the Bit Rate and the
video properties with which participants connect to the Entry Queue
and destination conference.
In Ad Hoc conferencing, it is used to define the new conference
properties.
ID Enter a unique number identifying this conferencing entity for dial in.
Default string length is 4 digits.
If you do not manually assign the ID, the MCU assigns one after the
completion of the definition. The ID String Length is defined by the
flag NUMERIC_CONF_ID_LEN in the System Configuration.
Entry Queue Mode Select the mode for the Entry Queue:
Standard Lobby (default)-When selected, the Entry Queue is used
as a routing lobby to access conferences. Participants connect to a
single-dial lobby and are routed to their destination conference
according to the Conference ID they enter.
Ad Hoc - Select this option to enable the Ad Hoc option for this Entry
Queue. In this mode, when the participant enters the target
conference ID the system checks whether a conference with that ID
is already running on the MCU. If not, the system automatically
creates a new ongoing conference with that ID.
IVR Service Provider Only - Not Supported with Polycom RMX
1800.
External IVR Control - Not Supported with Polycom RMX 1800.
Entry Queue IVR
Service
The default Entry Queue IVR Service is selected. If required, select
an alternate Entry Queue IVR Service, which includes the required
voice prompts, to guide participants during their connection to the
Entry Queue.
Table 7-2: Entry Queue Definitions Parameters (Continued)
Option Description