Chapter 16-IP Network Services
Polycom, Inc. 16-9
4Click the Routers tab.
With the exception of IP Network Type, the field definitions of the Routers tab are the
same as for the Default Management Network. For more information see page16-4.
5Optional. Click the DNS tab.
Settings in this dialog box are relevant to Multiple Network Services only.
For more information see "NAT (Network Address Translation) Traversal” on page 16-23.
IP Network Type Displays the network type selected during the First Entry
configuration. The Default IP Network icon indicates the selected
environment.
You can select:
•H.323: For an H.323-only Network Service.
•SIP: For a SIP-only Network Service.
•H.323 & SIP: For an integrated IP Service. Both H.323 and SIP
participants can connect to the MCU using this service.
Note: This field is displayed in all Default IP Service tabs.
Signaling Host IP
Address
On RMX 1800 this field is disabled as only one IP address is used for
signaling and media transmission.
Media Card 1
IP Address
Enter the address to be used by IP endpoints when dialing in to the
MCU.
Subnet Mask Enter the subnet mask of the MCU.
Default value: 255.255.255.0.
Table 16-5 Default IP Network Service – IP (Continued)
Field Description