Digital Label Press 3 User’s Manual

Cancel/-

The Cancel button cancels cutting and ejects the page. As a fail-safe, the Retry button must first be pressed to pause cutting. When the Printer Hood is opened, pressing Cancel will force the paper to reverse through the paper path. This is useful in unloading the paper roll. The Cancel key also functions as "-" to step back through previously displayed options when using the Menu feature of your press as described below. When the Printer Hood is closed, press Cancel and Retry simultaneously to reset the press's processors and clear its memory buffer.

Menu/+

The Menu/+ will open the menu options. The menus will allow you to load paper and select some cutter settings. Once in the menu, this button performs the "+" feature to advance through available options while Cancel/- allows you to display the previous selection of the menu item. The following table describes the menu items available on your press:

Menu Item

Description

 

 

PAPER LOAD SEQ

This will initialize a paper load sequence that cuts

ENTER WHEN READY

the leading edge of the sheet and positions the

 

paper for printing. This is used when loading a new

 

roll and is describe in detail in section 4-G.

 

 

PAGE COUNT: 0000

This will reset the PAGE COUNT feature (described

ENTER TO ZERO

on page 13) to 0.

 

 

TEST PRINT

This will initiate a printer self test described in

ENTER WHEN READY

detail in section 5-A

 

 

PAGE LOAD TEST

This tests the paper path of the press and is

ENTER WHEN READY

described further in section 5-A

 

 

Table 3.2. Menu Items in the Control Panel Display

NOTE: The Menu will automatically close if no button is pressed for a period of 10 seconds.

Retry/ Enter

The Retry button is used to continue press operation after an error has occurred. For example, if your press runs out of ribbon, the machine will stop printing and an OUT OF RIBBON error will be displayed on the LCD. Once a new ribbon has been installed, you can press the Retry button to continue the job. The Enter feature is used to select a choice in Menu mode as described above. When the Printer Hood is open, pressing Retry will force-feed the media through the paper path. With the Printer Hood closed, pressing Retry and Cancel simultaneously will reset the press's processors and clear its memory buffer.

12

Section 3: Getting Started

Page 17
Image 17
Primera Technology 510212 manual Cancel