Primera Technology 510212 manual F. Loading The Print Media Roll Into The Press

Digital Label Press 3 User’s Manual

NOTE: Although the #300-Series Black UL-Recognized Ribbon provides maximum printquality when printing onto #300-Series Polyesters, you may also achieve acceptable results by using the variety of other #300-Series Resin Ribbons with the polyester materials. If doing so, increase the Intensity setting within the printer driver setup window (see Section 6-D). Note that print quality may vary when using the standard resin ribbons with the polyester materials and, therefore, is not guaranteed.

IMPORTANT! Always seal print media in its original packaging and place on a smooth, flat surface when not in use. Do not stack objects on top of the print media or place more than 500 sheets in a single stack. Print media must not be exposed to excess dust, heat, direct sunlight, or moisture and must not be allowed to curl or bend.

F. LOADING THE PRINT MEDIA ROLL INTO THE PRESS

Your press uses media on a proprietary roll. The core of the media roll contains a chip that stores important information which is displayed on the LCD panel. This system allows the user to identify the type of media on the roll as well as the number of prints remaining on the roll by simply looking at the LCD display panel.

Refer to the following steps to load print media into the supply tray:

1.Pull the Media Roll Release Lever downward.

Media Roll Release Lever

Section 4: Ribbon and Print Media

23