Q-Logic 59042-07 A Laser Safety Information, Electrostatic Discharge Sensitivity Esds Precautions

0	1 – Introduction
	Laser Safety Information

1.8

Laser Safety Information

This product may use Class 1 laser optical transceivers to communicate over the fiber optic conductors. The U.S. Department of Health and Human Services (DHHS) does not consider Class 1 lasers to be hazardous. The International Electrotechnical Commission (IEC) 825 Laser Safety Standard requires labeling in English, German, Finnish, and French stating that the product uses Class 1 lasers. Because it is impractical to label the transceivers, the following label is provided in this manual.

1.9

Electrostatic Discharge Sensitivity (ESDS) Precautions

The assemblies used in the switch chassis are ESD sensitive. Observe ESD handling procedures when handling any assembly used in the switch chassis.

1.10

Accessible Parts

The Field Replaceable Units (FRUs) in the SANbox2-8c switch are the following:

„Small Form-Factor Pluggable (SFP) optical transceivers

1.11

Pièces Accessibles

Les pièces remplaçables, Field Replaceable Units (FRU), du commutateur SANbox2-8c Fibre Channel Switch sont les suivantes:

„Interfaces aux media d’interconnexion appelés SFP transceivers.

1.12

Zugängliche Teile

Nur die folgenden Teile im SANbox2-8c Fibre Channel Switch können kundenseitig ersetzt werden:

„Schnittstellen für die Zwischenverbindungsträger, SFP transceivers genannt.

59042-07 A 1-7