
0 |
|
| B – Command Line Interface | ||
|
|
| |||
|
|
|
| Set Setup Command | |
|
|
|
|
|
|
|
|
|
|
|
|
TrapCommunity | (string, max=32 chars) | [public | ] |
| |
AuthFailureTrap | (True / False) | [False | ] |
| |
ProxyEnabled | (True / False) | [True | ] |
| |
The following is an example of the Set Setup System command: |
| ||||
SANbox2 (admin) #> set setup system |
|
|
|
| |
A list of attributes with formatting and current values will follow. |
| ||||
Enter a new value or simply press the ENTER key to accept the current value. | |||||
If you wish to terminate this process before reaching the end of the list |
| ||||
press 'q' or 'Q' and the ENTER key to do so. |
|
|
|
| |
Eth0NetworkDiscovery | (1=Static, 2=Bootp, 3=Dhcp, 4=Rarp) | [Static | ] | ||
Eth0NetworkAddress |
|
| [10.0.0.1 | ] | |
Eth0NetworkMask |
|
| [255.255.255.0] | ||
Eth0GatewayAddress |
|
| [10.0.0.254 | ] | |
AdminTimeout | (dec value | [30 | ] | ||
InactivityTimeout | (dec value | [0 | ] | ||
LocalLogEnabled | (True / False) |
|
| [True | ] |
RemoteLogEnabled | (True / False) |
|
| [False | ] |
RemoteLogHostAddress |
|
| [10.0.0.254 | ] | |
NTPClientEnabled | (True / False) |
|
| [False | ] |
NTPServerAddress |
|
| [10.0.0.254 | ] | |
EmbeddedGUIEnabled | (True / False) |
|
| [True | ] |