Manuals / Q-Logic / Computer Equipment / Switch

Q-Logic 59042-07 A manual Mount the Switch, Avertissement

Models: 59042-07 A

1 206

Download 206 pages 25.92 Kb

Page 51

0	4 – Installation
	4 – Installation
	Installing a Switch

Installing a SANbox2-8c switch involves the following steps:

1.Mount the switch.

2.Install SFP transceivers.

3.Connect the management workstation to the switch.

4.Configure the management workstation.

5.Install the management application.

6.Start the management application.

7.Connect the switch to the AC power source.

8.Configure the switch.

9.Cable devices to the switch.

4.2.1

Mount the Switch

The switch can be placed on a flat surface and stacked or mounted in a 19” EIA rack. Refer to “Dimensions” on page A-3for weight and dimensional specifications. The top of each chassis has dimples to receive the rubber feet of a second chassis stacked on top. Without the rubber feet, the switch occupies 1U of space in an EIA rack. Mounting rails are required for rack installation and are available through QLogic Corporation.

WARNING!! Mount switches in the rack so that the weight is distributed evenly. An unevenly loaded rack can become unstable possibly resulting in equipment damage or personal injury.

AVERTISSEMENT!!

Installer les commutateurs dans l’armoire informatique de sorte que le poids soit réparti uniformément. Une armoire informatique déséquilibré risque d'entraîner des blessures ou d'endommager l'équipement.

WARNUNG!!

Switches so in das Rack einbauen, dass das Gewicht gleichmäßig verteilt ist. Ein Rack mit ungleichmäßiger Gewichtsverteilung kann schwanken/umfallen und Gerätbeschädigung oder Verletzung verursachen.

59042-07 A

4-3

Image 51

Q-Logic 59042-07 A manual Mount the Switch, Avertissement

Contents

SANbox2-8c Fibre Channel Switch Installation Guide Document Revision History SANbox2-8c Fibre Channel Switch Installation GuideTable of Contents Distance Bandwidth Latency Soft Zones Access Control List Hard ZonesUser Account Security Fabric Services Section PlanningSection Diagnostics/Troubleshooting Section InstallationAppendix B Command Line Interface Appendix a SpecificationsGlossary Index SANbox2-8c Fibre Channel Switch100 TablesIntended Audience IntroductionNew in this Release Related MaterialsSicherheitshinweise Safety NoticesFederal Communications Commission FCC Class a Statement Communications StatementsCE Statement Bsmi Class a Statement Vcci Class a StatementPièces Accessibles Laser Safety InformationElectrostatic Discharge Sensitivity Esds Precautions Accessible PartsPreamble General Public LicenseSoftware Others will not reflect on the original authors reputationsAll Introduction General Public License Introduction Introduction General Public License No Warranty How to Apply These Terms to Your New ProgramsCopyright C yyyy name of author Contact Information Technical SupportAvailability TrainingIntroduction Technical Support 59042-07 a General Description Chassis Controls and Leds Chassis Controls and LEDsMaintenance Button Resetting a SwitchPlacing the Switch in Maintenance Mode Heartbeat LED Amber Over Temperature LED AmberChassis LEDs Fan Fail LED AmberFibre Channel Ports Input Power LED GreenPort LEDs Port Logged-In LEDPort Activity LED Port Types Small Form-Factor Pluggable SFP TransceiversEthernet Port Ethernet PortSerial Port Pin Identification Serial PortSwitch supports the following management tools Power Supply and FanSwitch Management SANsurfer Switch ManagerSimple Network Management Protocol SANsurfer Switch Manager Web AppletCommand Line Interface SANsurfer Switch Manager Application Programming InterfaceFile Transfer Protocol Devices Consider the following when planning a fabricZoning Database Limits Device AccessSoft Zones Access Control List Hard ZonesDistance PerformanceBandwidth LatencyPort-to-Port Latency Optimizing Device Performance Multiple Chassis FabricsDomain ID, Principal Priority, and Domain ID Lock SANbox2-8c switch supports the following topologies Common TopologiesCascade Topology Mesh Topology Mesh TopologyMultistage Topology Multistage TopologyFabric Services Fabric SecurityUser Account Security Fabric Management Management Workstation Requirements Switch Power RequirementsSite Requirements Fabric Management WorkstationEnvironmental Conditions Installing a SwitchAvertissement Mount the SwitchInstall SFP Transceivers Workstation Cable Connections Connect the Workstation to the SwitchConfigure the Workstation Setting the Workstation IP Address for Ethernet ConnectionsConfiguring the Workstation Serial Port Data Bits Enter the following COM Port settings in the COM PropertiesWindow and choose the OK button ‰ Bits per secondFor a Windows workstation Install the Management ApplicationFor a Solaris workstation For a Linux workstationSANsurfer Management Suite SMS Installation for WindowsChglax.bat SMS Installation for Linux Chmod +x sansurferswitchmgrlinux4.02.xx.bin SMS Installation for Solaris Install the new SANsurfer Switch Manager package Change directories to the package locationLocate and execute the file sbmoversms.sh Start SANsurfer Switch Manager ‰ For Linux or Solaris, enter the following command‰ For Linux or Solaris enter the SANsurfer command Connect the Switch to AC Power Warnung Configure the Switch Telnet SANbox Login admin Password Install Firmware Cable Devices to the SwitchUsing the CLI to Install Firmware Using SANsurfer Switch Manager to Install FirmwarePowering Down a Switch Installation Powering Down a Switch 59042-07 a Post Diagnostics Diagnostics/TroubleshootingSystem Error Blink Pattern Heartbeat LED Blink PatternsInternal Firmware Failure Blink Pattern Configuration File System Error Blink Pattern Telnet xxx.xxx.xxx.xxx or Telnet switchname Logged-In LED Indications Open an admin session to acquire the necessary authorityEPort Isolation Excessive Port Errors Diagnostics/Troubleshooting Post Diagnostics Over Temperature LED is Illuminated Chassis DiagnosticsFan Fail LED is Illuminated Input Power LED Is ExtinguishedRecovering a Switch Maintenance Image Unpack Maintenance ExitMaintenance Remove Switch Config Maintenance Reset Network ConfigMaintenance Reset User Accounts to Default Maintenance Copy Log FilesMaintenance Reset Switch Maintenance Remake FilesystemFabric Specifications Maintainability Electrical DimensionsRegulatory Certifications EnvironmentalUser Accounts Logging On to a SwitchModifying a Configuration Working with Switch ConfigurationsSwitch When you are done making changes to the switchShown Backing up and Restoring Switch Configurations Ftp ipaddress Table B-1. Command-Line Completion CommandsCommand syntax is as follows Command keyword keyword valueAdmin Session Commands Table B-2. Commands Listed by Authority LevelKeywords Admin CommandAuthority SyntaxSyntax alias Alias CommandMembers alias Remove alias memberlistRename aliasold aliasnew Edit configname Config CommandSyntax config Keywords activate confignameSave configname RestoreManager Archive function are not compatible with the Config Restore commandDownload the file to the workstation # ftp symbolicname or ipaddressCreate support Create Support CommandAdmin session Following is an example of the Create Support commandYou have transferred 43430 bytes in 1 files Date Command Syntax dateKeywords MMDDhhmmCCYY Firmware Install Command Authority AdminSyntax firmware install Syntax Hardreset CommandAuthority None Help CommandKeywords command Syntax help command keywordAuthority None Syntax history History CommandHotreset Hotreset CommandUnpack file Image CommandCleanup ImageFtp Ftp switchname Wait for the unpack to complete Lip portnumber Lip CommandFollowing is an example of the Lip command Reinitializes the specified loop portSyntax passwd accountname Keywords accountname Passwd CommandPing Command Syntax ping ipaddressKeywords ipaddress Displays current system process information Ps CommandFollowing is an example of the Ps command Syntax ExamplesQuit Command Closes the Telnet sessionSyntax quit, exit, or logout Config configname Reset CommandTable B-3. Switch Configuration Defaults SystemZoning Table B-4. Port Configuration Defaults Table B-6. Zoning Configuration Defaults Table B-8. System Configuration Defaults Syntax set Set CommandSetup option Switch statePort option Port portnumber Set Config CommandSet config Table B-9. Set Config Port ParametersCommand Line Interface Set Config Command Table B-9. Set Config Port Parameters Table B-10. Set Config Switch Parameters Resource Allocation Timeout Value Table B-10. Set Config Switch Parameters Threshold Table B-11. Set Config Threshold ParametersTable B-12. Set Config Zoning Parameters Arbff Following is an example of the Set Config Switch commandFollowing is an example of the Set Config Threshold command Attributes Following is an example of the Set Config Zoning commandClear Set Log CommandSet log ArchiveLevel filter Display filterStop Port portlistSave StartSet Port Command Command Line Interface Set Port Command Snmp System Set Setup CommandSet setup Table B-13. Snmp Configuration SettingsTable B-14. System Configuration Settings Table B-14. System Configuration Settings If you wish SANbox2 admin # set setup system Following is an example of the Set Setup System commandBroadcast Show CommandAlarm option Keywords aboutLog option Fdmi portwwnTable B-15. Show Port Parameters Ns optionPagebreak Perf optionLipalpdalps Steering domainid Post logSupport Table B-16. Switch Operational ParametersTopology Displays all connected devicesUsers Following is an example of the Show Domains command Following is an example of the Show Fabric commandVersion Following is an example of the Show Fdmi WWN command Following is an example of the Show Fdmi commandFollowing is an example of the Show NS local domain command Following is an example of the Show NS domainID commandFollowing is an example of the Show NS portID command Collisions0 txqueuelen100 Following is an example of the Show Interface commandPL-XPL-VC-SG3-22 Following is an example of the Show Port commandFollowing is an example of the Show Topology command Following is an example of the Show Switch commandCommand Line Interface Following is an example of the Show Version command Show config Show Config CommandFollowing is an example of the Show Config Threshold command Following is an example of the Show Config Switch commandFollowing is an example of the Show Config Zoning command Component Show Log CommandShow log Number of eventsPort SettingsLevel OptionsFollowing is an example of the Show Log Level command Following is an example of the Show Log Options commandFollowing is an example of the Show Log command Show Perf Command Following is an example of the Show Perf Byte command Show Setup Command Show setupMfg Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Shutdown Command Power from the switchShutdown Status Test CommandTest Port portnumber testtypeTest port x internal Command Line Interface Uptime Command Examples The following is an example of the Uptime commandAuthority None Syntax uptime User Command Following is an example of the User Edit command Following is an example of the User Add commandFollowing is an example of the User List command Following is an example of the User Delete commandWhoami Command Following is an example of the Whoami commandWhoami Syntax zone Zone CommandType zone zonetype Members zoneRemove zone memberlist Rename zoneold zonenewFollowing is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset Zoneset CommandRename zonesetold zonesetnew Following is an example of the Zoneset List commandFollowing is an example of the Zoneset Zones command Remove zoneset zonelistZoning Command Opens a Zoning Edit sessionHistory Table B-17. Zoning Database Limits LimitsE1JBOD1 E2JBOD2 Following is an example of the Zoning Limits commandFollowing is an example of the Zoning List command 59042-07 a 103 Command Line Interface Zoning Command 104 59042-07 a BootP Access Control List ZoneAdministrative State AlarmFabric Management Switch Class 3 ServiceConfigured Zone Sets Default VisibilityMaintenance Mode Input Power LEDInter-Switch Link Maintenance ButtonSANsurfer Switch Manager Over Temperature LEDPower On Self Test Post Principal SwitchSet of zone sets, zones, and aliases stored on a switch Zone SetZoning Database Page Numerics IndexIndex-2 59042-07 a LED Account B-1 59042-07 a Index-5 Index-6 59042-07 a