0 | 5 – Diagnostics/Troubleshooting |
| |
| Recovering a Switch |
|
|
|
|
5.3
Recovering a Switch
A switch can become inoperable or unmanageable for the following reasons:
Firmware becomes corrupt
IP address is lost
Switch configuration becomes corrupt
Forgotten password
In these specific cases, you can recover the switch using maintenance mode. Maintenance mode temporarily returns the switch IP address to 10.0.0.1 and provides opportunities to do the following:
Unpack a firmware image file
Restore the network configuration parameters to the default values
Remove all user accounts and restore the Admin account name password to the default.
Copy the log file
Restore factory defaults for all but user accounts and zoning
Restore all switch configuration parameters to the factory default values
Reset the switch
To recover a switch, do the following:
1.Place the switch in maintenance mode. Press and hold the Maintenance button with a pointed tool for
2.Allow one minute for the switch to complete its tests. When the switch is in maintenance mode, the Input LED will be illuminated and the Heartbeat LED will illuminate continuously. All other chassis LEDs will be extinguished.
3.Establish a Telnet session with the switch using the maintenance mode IP address 10.0.0.1.
4.Enter the maintenance mode account name and password (prom, prom), and press the Enter key.
Sanbox login: prom Password:xxxx [username@anteater:Itasca]% telnet 10.0.0.1 Trying 10.0.0.1...
Connected to 10.0.0.1. Escape character is '^]'.
