Heartbeat LED, Inactive Firmware, Initiator | Q-Logic 59042-07 A

0	SANbox2-8c Fibre Channel Switch
	SANbox2-8c Fibre Channel Switch
		Installation Guide

FRU

Field Replaceable Unit

Heartbeat LED

A chassis LED that indicates the status of the internal switch processor and the results of the Power-On Self-Test.

Inactive Firmware

The firmware image on the switch that is not in use.

Inband Management

The ability to manage a switch through another switch over an inter-switch link.

Initiator

The device that initiates a data exchange with a target device.

In-Order-Delivery

A feature that requires that frames be received in the same order in which they were sent.

Input Power LED

A chassis LED that indicates that the switch logic circuitry is receiving proper DC voltages.

Inter-Switch Link

The connection between two switches using E_Ports.

IP

Internet Protocol

LIP

Loop Initialization Primitive sequence

Logged-In LED

A port LED on SANbox2-8c and SANbox2-16 switches that indicates device login or loop initialization status.

Maintenance Button

Formerly known as the Force PROM button. Momentary button on the switch used to reset the switch or place the switch in maintenance mode.

Maintenance Mode

Formerly known as force PROM mode. Maintenance mode sets the IP address to

10.0.0.1and provides access to the switch for maintenance purposes.

Management Information Base

A set of guidelines and definitions for SNMP functions.

Management Workstation

PC workstation that manages the fabric through the fabric management switch.

Mesh Topology

A fabric in which each chassis has at least one port directly connected to each other chassis in the fabric.

MIB

Management Information Base

Multistage Topology

A fabric in which two or more edge switches connect to one or more core switches.

Network Time Protocol

A network protocol that enables a client to synchronize its time with a server.

59042-07 A

Glossary-3

Image 197

Q-Logic 59042-07 A Heartbeat LED, Inactive Firmware, Inband Management, Initiator, In-Order-Delivery, Input Power LED

Contents

SANbox2-8c Fibre Channel Switch Installation Guide Document Revision History SANbox2-8c Fibre Channel Switch Installation Guide Table of Contents User Account Security Fabric Services Soft Zones Access Control List Hard ZonesSection Planning Distance Bandwidth Latency Section Diagnostics/Troubleshooting Section Installation Appendix B Command Line Interface Appendix a Specifications Glossary Index SANbox2-8c Fibre Channel Switch 100 Tables Intended Audience Introduction New in this Release Related Materials Sicherheitshinweise Safety Notices Federal Communications Commission FCC Class a Statement Communications Statements CE Statement Bsmi Class a Statement Vcci Class a Statement Electrostatic Discharge Sensitivity Esds Precautions Laser Safety InformationAccessible Parts Pièces Accessibles Preamble General Public License All SoftwareOthers will not reflect on the original authors reputations Introduction General Public License Introduction Introduction General Public License No Warranty How to Apply These Terms to Your New Programs Copyright C yyyy name of author Availability Technical SupportTraining Contact Information Introduction Technical Support 59042-07 a General Description Chassis Controls and Leds Chassis Controls and LEDs Placing the Switch in Maintenance Mode Maintenance ButtonResetting a Switch Chassis LEDs Over Temperature LED AmberFan Fail LED Amber Heartbeat LED Amber Fibre Channel Ports Input Power LED Green Port Activity LED Port LEDsPort Logged-In LED Port Types Small Form-Factor Pluggable SFP Transceivers Ethernet Port Ethernet Port Serial Port Pin Identification Serial Port Switch Management Power Supply and FanSANsurfer Switch Manager Switch supports the following management tools Command Line Interface SANsurfer Switch Manager Web AppletSANsurfer Switch Manager Application Programming Interface Simple Network Management Protocol File Transfer Protocol Devices Consider the following when planning a fabric Zoning Database Limits Device Access Soft Zones Access Control List Hard Zones Distance Performance Port-to-Port Latency BandwidthLatency Optimizing Device Performance Multiple Chassis Fabrics Domain ID, Principal Priority, and Domain ID Lock Cascade Topology SANbox2-8c switch supports the following topologiesCommon Topologies Mesh Topology Mesh Topology Multistage Topology Multistage Topology User Account Security Fabric ServicesFabric Security Fabric Management Site Requirements Switch Power RequirementsFabric Management Workstation Management Workstation Requirements Environmental Conditions Installing a Switch Avertissement Mount the Switch Install SFP Transceivers Workstation Cable Connections Connect the Workstation to the Switch Configuring the Workstation Serial Port Configure the WorkstationSetting the Workstation IP Address for Ethernet Connections Window and choose the OK button Enter the following COM Port settings in the COM Properties‰ Bits per second Data Bits For a Windows workstation Install the Management Application For a Solaris workstation For a Linux workstation SANsurfer Management Suite SMS Installation for Windows Chglax.bat SMS Installation for Linux Chmod +x sansurferswitchmgrlinux4.02.xx.bin SMS Installation for Solaris Locate and execute the file sbmoversms.sh Install the new SANsurfer Switch Manager packageChange directories to the package location ‰ For Linux or Solaris enter the SANsurfer command Start SANsurfer Switch Manager‰ For Linux or Solaris, enter the following command Connect the Switch to AC Power Warnung Configure the Switch Telnet SANbox Login admin Password Install Firmware Cable Devices to the Switch Using the CLI to Install Firmware Using SANsurfer Switch Manager to Install Firmware Powering Down a Switch Installation Powering Down a Switch 59042-07 a Post Diagnostics Diagnostics/Troubleshooting Internal Firmware Failure Blink Pattern System Error Blink PatternHeartbeat LED Blink Patterns Configuration File System Error Blink Pattern Telnet xxx.xxx.xxx.xxx or Telnet switchname Logged-In LED Indications Open an admin session to acquire the necessary authority EPort Isolation Excessive Port Errors Diagnostics/Troubleshooting Post Diagnostics Over Temperature LED is Illuminated Chassis Diagnostics Fan Fail LED is Illuminated Input Power LED Is Extinguished Recovering a Switch Maintenance Image Unpack Maintenance Exit Maintenance Reset User Accounts to Default Maintenance Reset Network ConfigMaintenance Copy Log Files Maintenance Remove Switch Config Maintenance Reset Switch Maintenance Remake Filesystem Fabric Specifications Maintainability Electrical Dimensions Regulatory Certifications Environmental User Accounts Logging On to a Switch Modifying a Configuration Working with Switch Configurations Shown SwitchWhen you are done making changes to the switch Backing up and Restoring Switch Configurations Ftp ipaddress Command syntax is as follows CommandsCommand keyword keyword value Table B-1. Command-Line Completion Admin Session Commands Table B-2. Commands Listed by Authority Level Authority Admin CommandSyntax Keywords Syntax alias Alias Command Rename aliasold aliasnew Members aliasRemove alias memberlist Syntax config Config CommandKeywords activate configname Edit configname Manager Archive function are not compatible with the Config RestoreRestore command Save configname Download the file to the workstation # ftp symbolicname or ipaddress Admin session Create Support CommandFollowing is an example of the Create Support command Create support You have transferred 43430 bytes in 1 files Keywords MMDDhhmmCCYY Date CommandSyntax date Syntax firmware install Firmware Install CommandAuthority Admin Syntax Hardreset Command Keywords command Help CommandSyntax help command keyword Authority None Authority None Syntax history History Command Hotreset Hotreset Command Cleanup Image CommandImage Unpack file Ftp Ftp switchname Wait for the unpack to complete Following is an example of the Lip command Lip CommandReinitializes the specified loop port Lip portnumber Syntax passwd accountname Keywords accountname Passwd Command Keywords ipaddress Ping CommandSyntax ping ipaddress Following is an example of the Ps command Ps CommandSyntax Examples Displays current system process information Syntax quit, exit, or logout Quit CommandCloses the Telnet session Config configname Reset Command Zoning Table B-3. Switch Configuration DefaultsSystem Table B-4. Port Configuration Defaults Table B-6. Zoning Configuration Defaults Table B-8. System Configuration Defaults Syntax set Set Command Port option Setup optionSwitch state Set config Set Config CommandTable B-9. Set Config Port Parameters Port portnumber Command Line Interface Set Config Command Table B-9. Set Config Port Parameters Table B-10. Set Config Switch Parameters Resource Allocation Timeout Value Table B-10. Set Config Switch Parameters Threshold Table B-11. Set Config Threshold Parameters Table B-12. Set Config Zoning Parameters Arbff Following is an example of the Set Config Switch command Following is an example of the Set Config Threshold command Attributes Following is an example of the Set Config Zoning command Set log Set Log CommandArchive Clear Level filter Display filter Save Port portlistStart Stop Set Port Command Command Line Interface Set Port Command Set setup Set Setup CommandTable B-13. Snmp Configuration Settings Snmp System Table B-14. System Configuration Settings Table B-14. System Configuration Settings If you wish SANbox2 admin # set setup system Following is an example of the Set Setup System command Alarm option Show CommandKeywords about Broadcast Log option Fdmi portwwn Pagebreak Ns optionPerf option Table B-15. Show Port Parameters Lipalpdalps Steering domainid Post log Support Table B-16. Switch Operational Parameters Users TopologyDisplays all connected devices Version Following is an example of the Show Domains commandFollowing is an example of the Show Fabric command Following is an example of the Show Fdmi WWN command Following is an example of the Show Fdmi command Following is an example of the Show NS portID command Following is an example of the Show NS local domain commandFollowing is an example of the Show NS domainID command Collisions0 txqueuelen100 Following is an example of the Show Interface command PL-XPL-VC-SG3-22 Following is an example of the Show Port command Following is an example of the Show Topology command Following is an example of the Show Switch command Command Line Interface Following is an example of the Show Version command Show config Show Config Command Following is an example of the Show Config Threshold command Following is an example of the Show Config Switch command Following is an example of the Show Config Zoning command Show log Show Log CommandNumber of events Component Level SettingsOptions Port Following is an example of the Show Log command Following is an example of the Show Log Level commandFollowing is an example of the Show Log Options command Show Perf Command Following is an example of the Show Perf Byte command Mfg Show Setup CommandShow setup Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Shutdown Shutdown CommandPower from the switch Test Test CommandPort portnumber testtype Status Test port x internal Command Line Interface Authority None Syntax uptime Uptime CommandExamples The following is an example of the Uptime command User Command Following is an example of the User Edit command Following is an example of the User Add command Following is an example of the User List command Following is an example of the User Delete command Whoami Whoami CommandFollowing is an example of the Whoami command Syntax zone Zone Command Remove zone memberlist Members zoneRename zoneold zonenew Type zone zonetype Following is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset Zoneset Command Following is an example of the Zoneset Zones command Following is an example of the Zoneset List commandRemove zoneset zonelist Rename zonesetold zonesetnew History Zoning CommandOpens a Zoning Edit session Table B-17. Zoning Database Limits Limits E1JBOD1 E2JBOD2 Following is an example of the Zoning Limits command Following is an example of the Zoning List command 59042-07 a 103 Command Line Interface Zoning Command 104 59042-07 a Administrative State Access Control List ZoneAlarm BootP Configured Zone Sets Class 3 ServiceDefault Visibility Fabric Management Switch Inter-Switch Link Input Power LEDMaintenance Button Maintenance Mode Power On Self Test Post Over Temperature LEDPrincipal Switch SANsurfer Switch Manager Zoning Database Set of zone sets, zones, and aliases stored on a switchZone Set Page Numerics Index Index-2 59042-07 a LED Account B-1 59042-07 a Index-5 Index-6 59042-07 a