Configure the Switch | Q-Logic 59042-07 A specification

0	4 – Installation
	4 – Installation
	Installing a Switch

The Heartbeat LED indicates the results of the POST. The POST tests the condition of firmware, memories, data-paths, and switch logic circuitry. If the Heartbeat LED blinks steadily about once per second, the POST was successful, and you can continue with the installation process. Any other blink pattern indicates that an error has occurred. Refer to “Heartbeat LED Blink Patterns” on page 5-2for more information about error blink patterns.

The application opens with the Initial Start dialog. Refer to the SANbox2-8c/16 Switch Management User’s Guide for more information about using, exiting, and uninstalling SANsurfer Switch Manager.

4.2.8

Configure the Switch

You can configure the switch using the SANsurfer Switch Manager application or the command line interface. To configure the switch using SANsurfer Switch Manager, click the Open Configuration Wizard radio button in the Initial Start dialog, then click the Proceed button. The Configuration wizard explains and prompts you for the following configuration information:

Temporary IP address

Temporary subnet mask

Archive template file

Switch domain ID (1–-239)

Domain ID Lock (Locked/Unlocked)

Switch name

Permanent IP address

Permanent subnet mask

Permanent gateway address

Permanent network discovery method

Date and time

Admin account password

Create a configuration archive?

Note: Refer to Table B-3through Table B-8for information on factory configuration default values.

59042-07 A

4-19

Image 67

Q-Logic 59042-07 A manual Configure the Switch

Contents

SANbox2-8c Fibre Channel Switch Installation Guide Document Revision History SANbox2-8c Fibre Channel Switch Installation Guide Table of Contents Distance Bandwidth Latency Soft Zones Access Control List Hard ZonesUser Account Security Fabric Services Section Planning Section Diagnostics/Troubleshooting Section Installation Appendix B Command Line Interface Appendix a Specifications Glossary Index SANbox2-8c Fibre Channel Switch 100 Tables Intended Audience Introduction New in this Release Related Materials Sicherheitshinweise Safety Notices Federal Communications Commission FCC Class a Statement Communications Statements CE Statement Bsmi Class a Statement Vcci Class a Statement Pièces Accessibles Laser Safety InformationElectrostatic Discharge Sensitivity Esds Precautions Accessible Parts Preamble General Public License Others will not reflect on the original authors reputations SoftwareAll Introduction General Public License Introduction Introduction General Public License No Warranty How to Apply These Terms to Your New Programs Copyright C yyyy name of author Contact Information Technical SupportAvailability Training Introduction Technical Support 59042-07 a General Description Chassis Controls and Leds Chassis Controls and LEDs Resetting a Switch Maintenance ButtonPlacing the Switch in Maintenance Mode Heartbeat LED Amber Over Temperature LED AmberChassis LEDs Fan Fail LED Amber Fibre Channel Ports Input Power LED Green Port Logged-In LED Port LEDsPort Activity LED Port Types Small Form-Factor Pluggable SFP Transceivers Ethernet Port Ethernet Port Serial Port Pin Identification Serial Port Switch supports the following management tools Power Supply and FanSwitch Management SANsurfer Switch Manager Simple Network Management Protocol SANsurfer Switch Manager Web AppletCommand Line Interface SANsurfer Switch Manager Application Programming Interface File Transfer Protocol Devices Consider the following when planning a fabric Zoning Database Limits Device Access Soft Zones Access Control List Hard Zones Distance Performance Latency BandwidthPort-to-Port Latency Optimizing Device Performance Multiple Chassis Fabrics Domain ID, Principal Priority, and Domain ID Lock Common Topologies SANbox2-8c switch supports the following topologiesCascade Topology Mesh Topology Mesh Topology Multistage Topology Multistage Topology Fabric Security Fabric ServicesUser Account Security Fabric Management Management Workstation Requirements Switch Power RequirementsSite Requirements Fabric Management Workstation Environmental Conditions Installing a Switch Avertissement Mount the Switch Install SFP Transceivers Workstation Cable Connections Connect the Workstation to the Switch Setting the Workstation IP Address for Ethernet Connections Configure the WorkstationConfiguring the Workstation Serial Port Data Bits Enter the following COM Port settings in the COM PropertiesWindow and choose the OK button ‰ Bits per second For a Windows workstation Install the Management Application For a Solaris workstation For a Linux workstation SANsurfer Management Suite SMS Installation for Windows Chglax.bat SMS Installation for Linux Chmod +x sansurferswitchmgrlinux4.02.xx.bin SMS Installation for Solaris Change directories to the package location Install the new SANsurfer Switch Manager packageLocate and execute the file sbmoversms.sh ‰ For Linux or Solaris, enter the following command Start SANsurfer Switch Manager‰ For Linux or Solaris enter the SANsurfer command Connect the Switch to AC Power Warnung Configure the Switch Telnet SANbox Login admin Password Install Firmware Cable Devices to the Switch Using the CLI to Install Firmware Using SANsurfer Switch Manager to Install Firmware Powering Down a Switch Installation Powering Down a Switch 59042-07 a Post Diagnostics Diagnostics/Troubleshooting Heartbeat LED Blink Patterns System Error Blink PatternInternal Firmware Failure Blink Pattern Configuration File System Error Blink Pattern Telnet xxx.xxx.xxx.xxx or Telnet switchname Logged-In LED Indications Open an admin session to acquire the necessary authority EPort Isolation Excessive Port Errors Diagnostics/Troubleshooting Post Diagnostics Over Temperature LED is Illuminated Chassis Diagnostics Fan Fail LED is Illuminated Input Power LED Is Extinguished Recovering a Switch Maintenance Image Unpack Maintenance Exit Maintenance Remove Switch Config Maintenance Reset Network ConfigMaintenance Reset User Accounts to Default Maintenance Copy Log Files Maintenance Reset Switch Maintenance Remake Filesystem Fabric Specifications Maintainability Electrical Dimensions Regulatory Certifications Environmental User Accounts Logging On to a Switch Modifying a Configuration Working with Switch Configurations When you are done making changes to the switch SwitchShown Backing up and Restoring Switch Configurations Ftp ipaddress Table B-1. Command-Line Completion CommandsCommand syntax is as follows Command keyword keyword value Admin Session Commands Table B-2. Commands Listed by Authority Level Keywords Admin CommandAuthority Syntax Syntax alias Alias Command Remove alias memberlist Members aliasRename aliasold aliasnew Edit configname Config CommandSyntax config Keywords activate configname Save configname RestoreManager Archive function are not compatible with the Config Restore command Download the file to the workstation # ftp symbolicname or ipaddress Create support Create Support CommandAdmin session Following is an example of the Create Support command You have transferred 43430 bytes in 1 files Syntax date Date CommandKeywords MMDDhhmmCCYY Authority Admin Firmware Install CommandSyntax firmware install Syntax Hardreset Command Authority None Help CommandKeywords command Syntax help command keyword Authority None Syntax history History Command Hotreset Hotreset Command Unpack file Image CommandCleanup Image Ftp Ftp switchname Wait for the unpack to complete Lip portnumber Lip CommandFollowing is an example of the Lip command Reinitializes the specified loop port Syntax passwd accountname Keywords accountname Passwd Command Syntax ping ipaddress Ping CommandKeywords ipaddress Displays current system process information Ps CommandFollowing is an example of the Ps command Syntax Examples Closes the Telnet session Quit CommandSyntax quit, exit, or logout Config configname Reset Command System Table B-3. Switch Configuration DefaultsZoning Table B-4. Port Configuration Defaults Table B-6. Zoning Configuration Defaults Table B-8. System Configuration Defaults Syntax set Set Command Switch state Setup optionPort option Port portnumber Set Config CommandSet config Table B-9. Set Config Port Parameters Command Line Interface Set Config Command Table B-9. Set Config Port Parameters Table B-10. Set Config Switch Parameters Resource Allocation Timeout Value Table B-10. Set Config Switch Parameters Threshold Table B-11. Set Config Threshold Parameters Table B-12. Set Config Zoning Parameters Arbff Following is an example of the Set Config Switch command Following is an example of the Set Config Threshold command Attributes Following is an example of the Set Config Zoning command Clear Set Log CommandSet log Archive Level filter Display filter Stop Port portlistSave Start Set Port Command Command Line Interface Set Port Command Snmp System Set Setup CommandSet setup Table B-13. Snmp Configuration Settings Table B-14. System Configuration Settings Table B-14. System Configuration Settings If you wish SANbox2 admin # set setup system Following is an example of the Set Setup System command Broadcast Show CommandAlarm option Keywords about Log option Fdmi portwwn Table B-15. Show Port Parameters Ns optionPagebreak Perf option Lipalpdalps Steering domainid Post log Support Table B-16. Switch Operational Parameters Displays all connected devices TopologyUsers Following is an example of the Show Fabric command Following is an example of the Show Domains commandVersion Following is an example of the Show Fdmi WWN command Following is an example of the Show Fdmi command Following is an example of the Show NS domainID command Following is an example of the Show NS local domain commandFollowing is an example of the Show NS portID command Collisions0 txqueuelen100 Following is an example of the Show Interface command PL-XPL-VC-SG3-22 Following is an example of the Show Port command Following is an example of the Show Topology command Following is an example of the Show Switch command Command Line Interface Following is an example of the Show Version command Show config Show Config Command Following is an example of the Show Config Threshold command Following is an example of the Show Config Switch command Following is an example of the Show Config Zoning command Component Show Log CommandShow log Number of events Port SettingsLevel Options Following is an example of the Show Log Options command Following is an example of the Show Log Level commandFollowing is an example of the Show Log command Show Perf Command Following is an example of the Show Perf Byte command Show setup Show Setup CommandMfg Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Power from the switch Shutdown CommandShutdown Status Test CommandTest Port portnumber testtype Test port x internal Command Line Interface Examples The following is an example of the Uptime command Uptime CommandAuthority None Syntax uptime User Command Following is an example of the User Edit command Following is an example of the User Add command Following is an example of the User List command Following is an example of the User Delete command Following is an example of the Whoami command Whoami CommandWhoami Syntax zone Zone Command Type zone zonetype Members zoneRemove zone memberlist Rename zoneold zonenew Following is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset Zoneset Command Rename zonesetold zonesetnew Following is an example of the Zoneset List commandFollowing is an example of the Zoneset Zones command Remove zoneset zonelist Opens a Zoning Edit session Zoning CommandHistory Table B-17. Zoning Database Limits Limits E1JBOD1 E2JBOD2 Following is an example of the Zoning Limits command Following is an example of the Zoning List command 59042-07 a 103 Command Line Interface Zoning Command 104 59042-07 a BootP Access Control List ZoneAdministrative State Alarm Fabric Management Switch Class 3 ServiceConfigured Zone Sets Default Visibility Maintenance Mode Input Power LEDInter-Switch Link Maintenance Button SANsurfer Switch Manager Over Temperature LEDPower On Self Test Post Principal Switch Zone Set Set of zone sets, zones, and aliases stored on a switchZoning Database Page Numerics Index Index-2 59042-07 a LED Account B-1 59042-07 a Index-5 Index-6 59042-07 a