B – Command Line Interface | 0 | |
|
| |
Show Command |
|
|
|
|
|
|
|
|
ns [option]
Displays name server information for the specified [option]. If you omit [option], name server information for the local domain ID is displayed. [option] can have the following values:
all
Displays name server information for all switches and ports.
[domain_id]
Displays name server information for the switch given by [domain_id]. [domain_id] is a switch domain ID.
[port_id]
Displays name server information for the port given by [port_id]. [port_id] is a port Fibre Channel address.
pagebreak
Displays the current pagebreak setting. The pagebreak setting limits the display of information to 20 lines (On) or allows the continuous display of information without a break (Off).
perf [option]
Displays performance information for all ports. Refer to the “Show Perf Command” on page
port [port_number]
Displays operational information for the port given by [port_number]. Ports are numbered beginning with 0. If [port number] is omitted, information is displayed for all ports. Table
| Table | |
|
|
|
Entry |
| Description |
|
|
|
AIinit |
| Incremented each time the port begins AL initialization. |
AIinitError |
| Number of times the port entered initialization and the |
|
| initialization failed. |
Bad Frames |
| Number of frames that have framing errors. |
ClassXFramesIn |
| Number of class x frames received by this port. |
ClassXFramesOut |
| Number of class x frames sent by this port. |
ClassXWordsIn |
| Number of class x words received by this port. |
ClassXWordsOut |
| Number of class x words sent by this port. |
ClassXToss |
| Number of times an SOFi3 or SOFn3 frame is tossed from |
|
| TBUF. |
DecodeError |
| Number of decode errors detected |
|
|
|
