Related Materials, New in this Release | Q-Logic 59042-07 A manual

1 – Introduction	0
1 – Introduction
Related Materials

1.2

Related Materials

The following manuals and materials are referenced in the text and/or provide additional information.

SANbox2-8c/16 Switch Management User’s Guide, publication number 59022-10.

QLogic Switch Interoperability Guide v3.0. This PDF document can be downloaded at http://www.qlogic.com/interopguide/info.asp#inter.

Fibre Channel-Arbitrated Loop (FC-AL-2) Rev. 6.8.

Fibre Channel-10-bit Interface Rev. 2.3.

Definitions of Managed Objects for the Fabric Element in Fibre Channel Standard (draft-ietf-ipfc-fabric-element-mib-04.txt).

The Fibre Channel Standards are available from:

Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112-5776 Phone: (800) 854-7179 or (303) 397-7956

Fax: (303) 397-2740.

1.3

New in this Release

The following items are new in the current firmware release:

The switch supports a single firmware image and a pending image. Fallback command is no longer supported.

Firmware Install command has been added to simplify the installation of firmware.

Adding a fabric in SANsurfer Switch Manager always requires a user account and a password. The UserAuthentication parameter has been removed from the Set Setup System command.

Warning and failure temperature thresholds are fixed at 65° and 70° C respectively and cannot be changed.

FC-SW-2 Compliant and FC-SW-2 Autosave parameters are changed to Interop Mode and Interop Autosave respectively

I/O StreamGuard can be configured to automatically recognize an initiator device with a QLogic HBA.

1-2	59042-07 A

Image 10

Q-Logic 59042-07 A manual Related Materials, New in this Release

Contents

SANbox2-8c Fibre Channel Switch Installation Guide SANbox2-8c Fibre Channel Switch Installation Guide Document Revision History Table of Contents Section Planning Soft Zones Access Control List Hard ZonesUser Account Security Fabric Services Distance Bandwidth Latency Section Installation Section Diagnostics/Troubleshooting Appendix a Specifications Appendix B Command Line Interface SANbox2-8c Fibre Channel Switch Glossary Index Tables 100 Introduction Intended Audience Related Materials New in this Release Safety Notices Sicherheitshinweise Communications Statements Federal Communications Commission FCC Class a Statement CE Statement Vcci Class a Statement Bsmi Class a Statement Accessible Parts Laser Safety InformationElectrostatic Discharge Sensitivity Esds Precautions Pièces Accessibles General Public License Preamble Others will not reflect on the original authors reputations SoftwareAll Introduction General Public License Introduction Introduction General Public License How to Apply These Terms to Your New Programs No Warranty Copyright C yyyy name of author Training Technical SupportAvailability Contact Information Introduction Technical Support 59042-07 a General Description Chassis Controls and LEDs Chassis Controls and Leds Resetting a Switch Maintenance ButtonPlacing the Switch in Maintenance Mode Fan Fail LED Amber Over Temperature LED AmberChassis LEDs Heartbeat LED Amber Input Power LED Green Fibre Channel Ports Port Logged-In LED Port LEDsPort Activity LED Small Form-Factor Pluggable SFP Transceivers Port Types Ethernet Port Ethernet Port Serial Port Serial Port Pin Identification SANsurfer Switch Manager Power Supply and FanSwitch Management Switch supports the following management tools SANsurfer Switch Manager Application Programming Interface SANsurfer Switch Manager Web AppletCommand Line Interface Simple Network Management Protocol File Transfer Protocol Consider the following when planning a fabric Devices Device Access Zoning Database Limits Access Control List Hard Zones Soft Zones Performance Distance Latency BandwidthPort-to-Port Latency Multiple Chassis Fabrics Optimizing Device Performance Domain ID, Principal Priority, and Domain ID Lock Common Topologies SANbox2-8c switch supports the following topologiesCascade Topology Mesh Topology Mesh Topology Multistage Topology Multistage Topology Fabric Security Fabric ServicesUser Account Security Fabric Management Fabric Management Workstation Switch Power RequirementsSite Requirements Management Workstation Requirements Installing a Switch Environmental Conditions Mount the Switch Avertissement Install SFP Transceivers Connect the Workstation to the Switch Workstation Cable Connections Setting the Workstation IP Address for Ethernet Connections Configure the WorkstationConfiguring the Workstation Serial Port ‰ Bits per second Enter the following COM Port settings in the COM PropertiesWindow and choose the OK button Data Bits Install the Management Application For a Windows workstation For a Linux workstation For a Solaris workstation SMS Installation for Windows SANsurfer Management Suite Chglax.bat SMS Installation for Linux Chmod +x sansurferswitchmgrlinux4.02.xx.bin SMS Installation for Solaris Change directories to the package location Install the new SANsurfer Switch Manager packageLocate and execute the file sbmoversms.sh ‰ For Linux or Solaris, enter the following command Start SANsurfer Switch Manager‰ For Linux or Solaris enter the SANsurfer command Connect the Switch to AC Power Warnung Configure the Switch Telnet SANbox Login admin Password Cable Devices to the Switch Install Firmware Using SANsurfer Switch Manager to Install Firmware Using the CLI to Install Firmware Powering Down a Switch Installation Powering Down a Switch 59042-07 a Diagnostics/Troubleshooting Post Diagnostics Heartbeat LED Blink Patterns System Error Blink PatternInternal Firmware Failure Blink Pattern Configuration File System Error Blink Pattern Telnet xxx.xxx.xxx.xxx or Telnet switchname Open an admin session to acquire the necessary authority Logged-In LED Indications EPort Isolation Excessive Port Errors Diagnostics/Troubleshooting Post Diagnostics Chassis Diagnostics Over Temperature LED is Illuminated Input Power LED Is Extinguished Fan Fail LED is Illuminated Recovering a Switch Maintenance Exit Maintenance Image Unpack Maintenance Copy Log Files Maintenance Reset Network ConfigMaintenance Reset User Accounts to Default Maintenance Remove Switch Config Maintenance Remake Filesystem Maintenance Reset Switch Fabric Specifications Maintainability Dimensions Electrical Environmental Regulatory Certifications Logging On to a Switch User Accounts Working with Switch Configurations Modifying a Configuration When you are done making changes to the switch SwitchShown Backing up and Restoring Switch Configurations Ftp ipaddress Command keyword keyword value CommandsCommand syntax is as follows Table B-1. Command-Line Completion Table B-2. Commands Listed by Authority Level Admin Session Commands Syntax Admin CommandAuthority Keywords Alias Command Syntax alias Remove alias memberlist Members aliasRename aliasold aliasnew Keywords activate configname Config CommandSyntax config Edit configname Restore command RestoreManager Archive function are not compatible with the Config Save configname # ftp symbolicname or ipaddress Download the file to the workstation Following is an example of the Create Support command Create Support CommandAdmin session Create support You have transferred 43430 bytes in 1 files Syntax date Date CommandKeywords MMDDhhmmCCYY Authority Admin Firmware Install CommandSyntax firmware install Hardreset Command Syntax Syntax help command keyword Help CommandKeywords command Authority None History Command Authority None Syntax history Hotreset Command Hotreset Image Image CommandCleanup Unpack file Ftp Ftp switchname Wait for the unpack to complete Reinitializes the specified loop port Lip CommandFollowing is an example of the Lip command Lip portnumber Passwd Command Syntax passwd accountname Keywords accountname Syntax ping ipaddress Ping CommandKeywords ipaddress Syntax Examples Ps CommandFollowing is an example of the Ps command Displays current system process information Closes the Telnet session Quit CommandSyntax quit, exit, or logout Reset Command Config configname System Table B-3. Switch Configuration DefaultsZoning Table B-4. Port Configuration Defaults Table B-6. Zoning Configuration Defaults Table B-8. System Configuration Defaults Set Command Syntax set Switch state Setup optionPort option Table B-9. Set Config Port Parameters Set Config CommandSet config Port portnumber Command Line Interface Set Config Command Table B-9. Set Config Port Parameters Table B-10. Set Config Switch Parameters Resource Allocation Timeout Value Table B-10. Set Config Switch Parameters Table B-11. Set Config Threshold Parameters Threshold Table B-12. Set Config Zoning Parameters Following is an example of the Set Config Switch command Arbff Following is an example of the Set Config Threshold command Following is an example of the Set Config Zoning command Attributes Archive Set Log CommandSet log Clear Display filter Level filter Start Port portlistSave Stop Set Port Command Command Line Interface Set Port Command Table B-13. Snmp Configuration Settings Set Setup CommandSet setup Snmp System Table B-14. System Configuration Settings Table B-14. System Configuration Settings If you wish Following is an example of the Set Setup System command SANbox2 admin # set setup system Keywords about Show CommandAlarm option Broadcast Fdmi portwwn Log option Perf option Ns optionPagebreak Table B-15. Show Port Parameters Lipalpdalps Post log Steering domainid Table B-16. Switch Operational Parameters Support Displays all connected devices TopologyUsers Following is an example of the Show Fabric command Following is an example of the Show Domains commandVersion Following is an example of the Show Fdmi command Following is an example of the Show Fdmi WWN command Following is an example of the Show NS domainID command Following is an example of the Show NS local domain commandFollowing is an example of the Show NS portID command Following is an example of the Show Interface command Collisions0 txqueuelen100 Following is an example of the Show Port command PL-XPL-VC-SG3-22 Following is an example of the Show Switch command Following is an example of the Show Topology command Command Line Interface Following is an example of the Show Version command Show Config Command Show config Following is an example of the Show Config Switch command Following is an example of the Show Config Threshold command Following is an example of the Show Config Zoning command Number of events Show Log CommandShow log Component Options SettingsLevel Port Following is an example of the Show Log Options command Following is an example of the Show Log Level commandFollowing is an example of the Show Log command Show Perf Command Following is an example of the Show Perf Byte command Show setup Show Setup CommandMfg Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Power from the switch Shutdown CommandShutdown Port portnumber testtype Test CommandTest Status Test port x internal Command Line Interface Examples The following is an example of the Uptime command Uptime CommandAuthority None Syntax uptime User Command Following is an example of the User Add command Following is an example of the User Edit command Following is an example of the User Delete command Following is an example of the User List command Following is an example of the Whoami command Whoami CommandWhoami Zone Command Syntax zone Rename zoneold zonenew Members zoneRemove zone memberlist Type zone zonetype Following is an example of the Zone Members command Following is an example of the Zone Zonesets command Zoneset Command Syntax zoneset Remove zoneset zonelist Following is an example of the Zoneset List commandFollowing is an example of the Zoneset Zones command Rename zonesetold zonesetnew Opens a Zoning Edit session Zoning CommandHistory Limits Table B-17. Zoning Database Limits Following is an example of the Zoning Limits command E1JBOD1 E2JBOD2 Following is an example of the Zoning List command 59042-07 a 103 Command Line Interface Zoning Command 104 59042-07 a Alarm Access Control List ZoneAdministrative State BootP Default Visibility Class 3 ServiceConfigured Zone Sets Fabric Management Switch Maintenance Button Input Power LEDInter-Switch Link Maintenance Mode Principal Switch Over Temperature LEDPower On Self Test Post SANsurfer Switch Manager Zone Set Set of zone sets, zones, and aliases stored on a switchZoning Database Page Index Numerics Index-2 59042-07 a LED Account B-1 59042-07 a Index-5 Index-6 59042-07 a