8-3 Transfer Request
This feature WIII cause a document to be transmitted to up to 30 destinations vla a broad- casting station
r1
The message IS stored In the memory of the broadcasting transmitter and transmitted to each designated recewer In turn
After the end of broadcasting, a Transfer Result Report IS sent from the broadcasting station to the requesting station
Notes: . The ID codes of the requesting and the broadcasting stations must be Identical This code must be agreed upon and stored using function 62 before using this feature
●Your fax telephone number must also have been programmed, using function 80, before using this feature.
●Only a machine with the transfer broadcasting function can be used as a broad- casting station
eg Raplcom 5000 with SAF, 610, 830 Rlcoh FX5000 with SAF, FX830
Rlfax 2313HS, 231 7HS, 1300HS, 5100S, 610S
The Raplcom 5000 with SAF, Ricoh FX5000, and Rlfax 231 3HS WIII not send back the transfer result report after broadcasting If there IS one of these In your facsimile network, contact Rlcoh Service
●Your machine can only make a transfer request
●Transfer request cannot be made with transmission from memory
Caution: | The broadcaster and receiver numbers must all contain the International dialing |
| code and the country code, even If they are all In the same country, and even If |
| they are all In your own country |
