
9-11 Entering the RTI, TTI, and CSI
These labels Identify your terminal at the remote terminal.
RTI – This identifier will be displayed on the remote terminal operation panel during communication.
When you start a transmission, the RTI (or CSI) of the remote terminal will be dis- played on your terminal.
TTI – This identifier will be printed at the remote terminal on the top of each page that you send
Csl – This identifier is used instead of the RTI during communication with another maker’s terminal
1)Either:
To program the RTI, press the Function key, enter 63, and go to step 2.
Or:
To program the TTI, press the Function key, enter 64, and go to step 4.
Or:
To program the CSI, press the Function key, enter 65, and go to step6
MODE | NO | 63 | YN |
SET | RTl~ |
|
|
MODE | NO | 64 | YIN |
SET | TTl~ |
|
|
I |
|
|
|
MODE | NO | 65 | YIN |
~ SET | CSl~ |
|
|
1. |
|
|
|
2)Press Yes
3)Enter the required RTI, in up to 20 characters. You
could use your name, company, department, or phone number. Use the Quick Dial keypad and the
To enter a space, press Pause~Redial.
If you are editing an old RTI, you can move the cursor with the Clear key.
r |
|
|
I RTI | KPAD | Y |
Note: If a label is already present, you may change it, starting from the first character.
The full character set is given on page
Example RICOH
Press Yes to store this RTI.
.— |
|
|
I RTI | KPAD | Y |
~RlCOH=~9~=~~~S~~~==~
.—
r
RTI KPADY PROGRAMMED
L |
|
|
| YIN | |
MODE | NO 64 | |
SET | TTl~ |
|
.— |
|
|