7-3 Ringing Telephones and Buzzers
– Single Ring –
A message is coming in. It will be received automatically. Do not pick up the handset or the telephone.
– Continuous Ringing –
If the FAX Mode lamp is lit, either:
a)Power is switched off (the external telephone will ring).
b)The other party requires voice contact (the internal buzzer will ring). Pick up the handset, press the Stop key and speak.
Refer to “Voice Request” on page
If the TEL Mode lamp is lit:
A message is coming in and you are in manual reception (TEL) mode. 1) Pick up the handset and speak to the caller.
Note: | If the calling terminal is in |
| caller. You will hear |
| pitched tone. |
mode, you will not be able to speak to the tones. Press Start during the initial high-
2)Press Start after speaking.
3)When the Communicating lamp lights, hang up.
7-4 Making Telephone Calls (On-hook Dialing)
The machine can be used for making regular telephone calls.
1) Make sure that the machine is in standby mode.
2) Press the On Hook key.
[READY 100% 1130
SET DOCUMENT
ON HOOK DIAL MODE
OUICK/SPEED/KPAD
3)Enter the telephone number at the keypad as a Quick Dial key, Speed Dial code, or full telephone number.
Caution: If you are making a telephone call, do not press Start.
4)Listen to the monitor speaker.
When the other party answers, pick up the handset, and speak.
