Ricoh FAX75 manual Print Poll File List, Polling Recv Standby

If polling is time designated, a polling file list WIII be printed and the unit WIII return to standby.

If polling IS immediate, the terminal will begin to dial

If the polled location is busy, your terminal will redlal up to twice at intervals of five minutes

Notes: To cancel a preprogrammed time-designated mode 66 (see page 9-1 7)

PRINT POLL FILE LIST

SET DOCUMENT

2135557324

DIALING

polling reception operation, use

POLLING RECV STANDBY

If this is displayed, a message was coming in at the designated polling time or when you pressed Start Polling will begin Immediately after the end of recep- tion

RestrictIons

	Maximum number of destinations per polling file 100
	Maximum number of polling files: 8
	Maximum number of destinations over all polling files. 300
	Note that the total number of addresses stored in the machine for polling recep-
	tion and memory transmission, when added together, can not exceed 300
CAUTION:	Delayed programmed polling files are erased automatically after polling
	unless there is a line problem

2.Polling Transmission

This feature allows you to leave a document in the feeder for a remote terminal to pick up This will place your terminal in polling standby mode

Reception can take place as normal in polling standby mode

Note:	Polling transmission	can be either free or secured,
	Free polling –	Polling ID codes will not be checked. Any compatible termi-
		nal can poll yours.

Secured polling – Polling ID codes will be checked If a machine with a different ID code tries to poll your terminal, it will not succeed

8-11