Ricoh FAX75 manual Functions and Programming, Clock Adjustment

9. FUNCTIONS AND PROGRAMMING

This machine has a wide range of programmable functions. Study these functions to get the most out of the machine. Program these functions while the machine is in standby mode.

If you want to return the machine to standby mode at any time while programming, press the Function key.

Note: . If you entered the wrong function number, press the Function key again The machine will return to standby.

●When waiting for your response to a prompt, the system will time out and return to standby if a response is not input within 40 seconds

If this occurs, you must repeat the entire procedure until you return to the point you were at before the system timed out.

●All programmed items remain in the memory even if you switch the power off.

Functlon key

9-1		Clock Adjustment
1)Press the Function key,				then enter 50 at the keypad.	MODE	NO	50	YN
					ADJuST		CLOCK?
2)	Press Yes.				DATE	&	TIME	Y*bc
					APR	14	87	1130
3)	Either:
	Change the		item at the	cursor (blinking item).	DATE	&	TIME	Y*#c
	●	Increment	with #.		MAY	14	87	1130

●Decrement with ,

Or:

Move the cursor with Clear.

Or:

Press Yes to store the displayed data into the clock and go on to function 51.

Or:

Press Function to store the displayed data into the clock and go back to standby.

DATE	&	TIME	Y*	’#c
MAY	14	87	1130
L—	—
MODE	NO	51		YN
TO TAL#		Tx’Rx

9-1